FS: Brand New - BBS RS-GT - 20x8.5" and 20x9.5" - 5x112

[slcvr6]

$3300+shipping+Paypal fees. FIRM, not an OBO. <--Check Tire Rack pricing on the same wheels, it is more than $5800 (these were $6k+ when I purchased) and TR sells the more common diamond black finish. These wheels are almost impossible to get in 20" in this finish in the US. Still and frequently backordered from Tire Rack.

I bought these a while back for a project that never completed. These have not been removed from the boxes, no mounting attempts, they are BRAND NEW.

Fronts: 20x8.5" - ET38 - Model# RS965 - Weight 23.2lbs, Bolt Pattern 5x112
Rears: 20x9.5" - ET36 - Model# RS966 - Weight 24.1lbs, Bolt Pattern 5x112

Includes the valve stems and proper mounting kit for VW/Audi use, including locking lugs from BBS. All hardware is sealed.

These wheels are absolutely stunning in person and have never left the boxes. No disappointments. No stories. These are new wheels that were being saved for a project that isn't going to happen any longer.

Actual photos:











Additional high-res photos on request. Email is the best form of contact for the quickest response. I've had these priced much higher, these need to go sooner than later and are a STEAL at this price.

References on request from other sites I frequent.

-Robert
slcvr6 -at- earthlink -dot- net

[2PUTT]

were these the same wheels that were for sale in an MB forum from almost a year ago? i recognize the pictures.

[slcvr6]

Same wheels...way too many buyers that dragged me along and never completed the transactions. They remain boxed and ready to go.

-Robert
slcvr6 -at- earthlink -dot- net

[EuroA4]

2Putt...that's all you!!

[Jdubya]

I can vouch for the seller and these BALLIN wheels. Someone step up and buy them (since I can't).

I've given SLCVR6 about $30K of my money over the years everything is always top notch!

[gunxit]

WOWWWWWWWWWW SICK ASS DEALLLLLLLLLLLLLLLLLLLLLL!!!

OH GOSHHHH... I need a smoke.

BUMP!

[ibiski]

too bad they're not 19, otherwise they'd be mine

[slcvr6]

I can vouch for the seller and these BALLIN wheels. Someone step up and buy them (since I can't).

I've given SLCVR6 about $30K of my money over the years everything is always top notch!

Thanks, man! I still think these would be killer on the S4.

I have to answer to those that have questioned the low price...no, these are not replicas! Therefore, a price increase may be in order, as for some reason, some believe these are not legit.

-Robert
slcvr6 -at- earthlink -dot- net

[dtm4me]

Thanks, man! I still think these would be killer on the S4.

I have to answer to those that have questioned the low price...no, these are not replicas! Therefore, a price increase may be in order, as for some reason, some believe these are not legit.

-Robert
slcvr6 -at- earthlink -dot- net

No price increase. That's a great deal for RS-GTs, esp 20s!

[J.the W.]

Damn, I gotta get get a job

[slcvr6]

Back to page one...

-Robert
slcvr6 -at- earthlink -dot- net

[redhott06]

free bump for sexy wheels .. see the sig

[slcvr6]

Back to page one...

-Robert
slcvr6 -at- earthlink -dot- net

[NMS4]

BBK friendly?

[slcvr6]

BBK friendly?

Looks like they could be ok, as BBS fitment indicates 19s clear at least one Brembo BBK kit for the 04 S4.

Use the fitment guide here to determine specifics, http://www.bbs-usa.com/

-Robert
slcvr6 -at- earthlink -dot- net

[NMS4]

Looks like they could be ok, as BBS fitment indicates 19s clear at least one Brembo BBK kit for the 04 S4.

Use the fitment guide here to determine specifics, http://www.bbs-usa.com/

-Robert
slcvr6 -at- earthlink -dot- net

I checked and I guess the only wheel that fits is the CK

[slcvr6]

I checked and I guess the only wheel that fits is the CK

This may be an anomaly in how the older BBS site shows fitments.

The 19s are the same front offset as the 20s and the 19s do clear one of the big brake kits from Brembo, which is where your clearance will be most important. Which model number is your kit?

If you only specify 20" wheels, the CK is the option provided. I am pretty certain there are other B6 S4s running the same RS965 and RS966 wheels out there that I have listed here.

-Robert
slcvr6 -at- earthlink -dot- net

[slcvr6]

These are going to ebay soon...with a price bump.

-Robert
slcvr6 -at- earthlink -dot- net

[NMS4]

man if I was 100% that these would fit I would send cash asap! If you can figure out if they will or not let me know, I have the 6 piston brembo kit. I'm not sure what the product number is?

[slcvr6]

man if I was 100% that these would fit I would send cash asap! If you can figure out if they will or not let me know, I have the 6 piston brembo kit. I'm not sure what the product number is?

Can you get me a side shot of the front wheel with the brake kit shown?

I have no issue with test fitting on another 04 S4 locally, but the brake setup is what needs to be matched.

I did a quick search and the wheels you have listed on your car are an ET38 offset, which matches the fronts I have in this set. I can't imagine caliper clearance would be less on the BBS wheel, but specs can vary a touch.

Do you know who your BBK came from - which vendor?

-Robert

[NMS4]

do you need me to take the wheel off and take a picture, im not to sure what angle you need. I have the 6 piston brembo gran turismo kit, for some reason 355 is sticking in my mind.

[Taso]

bump for a good price

[slcvr6]

do you need me to take the wheel off and take a picture, im not to sure what angle you need. I have the 6 piston brembo gran turismo kit, for some reason 355 is sticking in my mind.

This page appears to list the necessary clearance specs of your kit - Brembo Gran Turismo 6 piston kit for B6 S4:

http://www.buybrakes.com/store/1M1-8032A

Will attempt to measure it all out tomorrow. I will be travelling T-S this week. so if you are itching to move forward, there will be some down time this week.

-Robert

[NMS4]

measure it out and let me know what you come up with. I'm looking to pull the trigger once I know everything is good with the caliper clearance. Just keep me posted can you email me the high res pictures to [email protected]