FMIC Intercooler for b5a4 $125

[f15046]

I have a front mount intercooler that was on my B5 A4 with stock front bumper. This is NOT a Ebay intercooler, it is a name brand intercooler but I can't find the reciept where I bought it from. This requires a medium amount of trimming to the bumper, with little to no trimming of the rebar in the bumper.
It doesn't come with any piping, I would recommend the do-it-yourself piping kits from Ebay, thats where I bought my piping from.

The dimension are 26"x6.5"x3" and from outlet to outlet it is 30" The inlet/outlet is 2". Perfect for a K03 or K04.

Asking $125 plus $17.00 shipping through UPS.

[slopoke]

how did you get a 3" core to fit behind the stock a4 bumper?

[headshok2002]

That bumper looks rough... Looks like lots and lots of trimming. Could you have even put the grills back in, or did you leave them off by choice?

[f15046]

The 3" core fit fine behind the bumper only problem was the way I had the intercooler piping ran they hit on the lower valence which is why it looks pushed down in the picture. It was not a lot of trimming it was minimal. the only grills that are not in the bumper is the center one.

[slopoke]

the entire car looks rough lol, maybe its just me but doesnt look like a 30" fmic

[f15046]

Look dude if you don't want to buy it then don't make a comment the intercooler is 30" that is from outlet to outlet. Read the damn post. How do you determine the whole car looks rough when all you can see is the frontend??? Stay out of post when you have no intent on purchasing this!

[ProJect_*A4*]

oooooooooooooooooooo buuuurrrrrrrrrn... =]

[slopoke]

just sayin the front end looks like it has seen better days... take it easy glws

Did you figure out what brand it is yet?

[vdub203]

looks likw atp

[f15046]

It could be, It looks to be very good quality, better than ebay intercoolers.

[FLACO X3]

this doesnt include piping?

[f15046]

No I'm using that for the intercooler I have on my car. You can get a piping kit off Ebay.