shipping to the continental US only unless you pay for any other fees!
contact me before purchasing anything!
paypal will be to [email protected]
First up is a powder coated valve cover and intake manifold for the B6 A4 1.8T. I had these on for only about 300 miles while I got my stock ones powder coated black.
These are a dark grey - very similar to the dolphin gray on the B6's. They are in very good condition.
These were featured in the writeup on my site, so there are more pics here:
http://www.a4mods.com/index.php?page...alvecover.html
and here
http://www.a4mods.com/index.php?page...emanifold.html
PIC REMOVED
only problem with the intake manifold is that a bolt snapped off in one of the holes It's not a big deal as it is only used to secure a coolant line to the cover. I just left it as it is, but I'm sure it can be taken out with a simple bolt extractor bit.
You can see it here.
PIC REMOVED
On the valve cover, you can see that I trimmed the one 'nub' to put the DTH CF coil cover on. If you choose to run your stock cover, you can simply put a spacer here (1 dollar at the local hardware store). Pretty much any other aftermarket engine cover will require you to trim this nub.
PIC REMOVED
I will sell these for $180 shipped.
SOLD to jrau13
Next is an auto meter 2" boost gauge. This thing is more or less new in the box. This is the second one I owned since I dropped and cracked my original one. I will include a second bulb and a red bulb cover so that it will back-light red. All the hoses/fittings/etc are BRAND NEW.
PIC REMOVED
For whoever buys this, I will also throw in this guage pod that I made. Note the gauge in the picture is the one I REPLACED... you will not have a dent in your gauge like this one does.
PIC REMOVED
$50 Shipped
SOLD to kwimberly
Next is a set of A-Pillar Covers. They are for a platinum grey interior for cars built AFTER May of 2003. There was a vin split at this time, and the color of the platinum interior changed - so if you check your build date, and it is after MAY of 2003, then these will match your car. I bought these for my car (2002) and learned this fact the hard way. The covers are in EXCELLENT condition.
$85 Shipped for BOTH - New at the dealer they are $106 EACH
Next is a full VOTEX body kit. This is a replica kit but is EXCELLENT. I got it from http://autobahnstyling.com/
Description : The Quattro optional extra overset kit also known as the Votex style kit. Made from P.U. plastic this kit comes complete with plastic honeycomb front and rear mesh and all fittings. Available with left , right or both exhaust outlet trims.
The kit was never installed on my car and is NEW in the BOX! It has all the mounting hardware, grilles, installation instructions, etc.
ISSUE: Since I got this from a european company, the rear bumper cover is made for a european rear! Unfortunately this means it wont fit directly on a a standard US rear bumper cover. It will only fit on an ultrasport rear or a european rear.
These kits are typically only available at the dealer. Pricing is:
Votex Front~$640
Votex Sides~$540
Votex Rear~$375
here is a gallery where you can see it installed on vehicles
http://a4mods.com/library/bodykits/?album=Votex
I will let the whole thing go for $700 plus shipping. If i get a higher offer on this, then I will sell it to the highest bidder. I have no idea how much shipping would be, but I would guess on the order of $150 or so.
Next is a set of FLAT (stock) silver door blades. I bought these used from someone a year ago and ran them for the summer. They are in good shape.
I didn't have any issues with them, I just went for a different look this summer.
Any marks (very minor) could easily be buffed out. There are two neuspeed stickers on the rear blades from the previous owner
$55 Shipped
Next is a set of In.Pro mirrors. These mirror need to be re-done. The plastic is in excellent shape, however I had some issues with the finish on these (peeling). These would make a great set of project mirrors if you were thinking of refinishing a set, etc. Some simple paint stripper and silver paint may be all you need to bring these back to new.
$45 shipped
SOLD to ProJect_*A4*
Boost pressure tester for stock Turbo Inlet hoses. I made this simple thing to pressure test the sytem. I show how it is used here:
http://www.a4mods.com/index.php?page...boostleak.html
PIC REMOVED
$10 shipped
SOLD to 7speed
For all you Joey-Modders, I have some extra headlight pieces. These are really random
$10 shipped
Fog light covers for a Rieger front bumper:
$10 shipped
Q Logic sealed sub enclosure for a 12 inch sub - 0.85 Cubic Feed
$40 shipped
ok im too lazy to post anything else...
Originally Posted by audimadness
German Engineering
Bookmarks