VMR Sport | Integrated Vent Gauge Kit

[VMRSport]

Introducing the Integraged Vent Gauge Kit by VMR Sport Tuning. For those looking for a clean, OEM look, boost gauge, our kit is the perfect choice for you.

The vent gauge kits are available for the following cars:

Audi A4 B6
Audi A4 B7
Audi A3
Audi A4 B5 (In development)

As far as pricing goes, it is as follows:

MSRP - $199
Introductory price - $149
Shipping is $10 dollars within the US.
Payments can be sent to [email protected]
Please include what color gauge you want and what vehicle it is for, in the comments/notes section, when sending payment.

We have plenty in stock, and items typically ship out the very next day, after you place your order.

Please feel free to PM or e-mail me with any questions you may have.

[email protected]

The gauge kit will include:

Drop-in vent gauge pod
Mechanical boost gauge - with a range of up to 30 psi (boost), and -30 mmHg (vacuum).
Boost gauge wiring harness
Rubber vacuum hose - 10 ft long
In-line vacuum line filter
Vacuum hose T-tap
Assorted wire taps
Misc. additional mounting/installation hardware
*The gauges come with either amber or white illumination, both will have an illuminating red gauge needle.

After many months of research and development, we are proud to announce that our drop-in integrated vent gauge kits are finally here and ready to ship out. Our integrated vent gauge kit is designed to be a direct OEM replacement piece, with no extra modifications necessary to the vents or the vent housings. All vent functions, excluding the sideways and up/down tilt, will remain functional. Everything is completely reversible, if you ever decide to return the car back to stock.

The VMR brand is the newest line of performance parts, wheels and accessories by Velocity Motoring. Whether your are looking to dress up your vehicle from our VMR Wheels line, add a little bit of extra 'go' from our VMR Sport Tuning products, or seeking all out, no compromise strength and lightweight alloys from our soon to be released VMR FORGED wheels, we strive to bring you only the best in quality and service at the most competitive prices.

I am also in the process of finishing up DIY installation guides for the B6 and B7 A4s and A3s. These will be provided to all of our customers, as well as any technical support or help that is needed.

thanks.

-Don

[EMAIL="[email protected]"][email protected][/EMAIL

[4RingRook]

Looks great! How difficult is the install?

[Raymax_2.0t]

I might have to order me one of these.

[VMRSport]

Install is fairly straight forward. It should take 1-2 hours.

I did an install for a customer yesterday, for testing, and in between talking to him, doing a test driver and taking pictures, it took a total of ~2 hours.

[06B7audiA4]

any in platinum?

[Sly Raskal]

any in platinum?

platinum? you mean like a brushed aluminum or chrome to match the bezels around the gauges in the instrument cluster?

[Sly Raskal]

Congrats on the product launch!

Question to the board: Between the VMR and the AWE kit, which kit has a needle that matches up the closest to the OEM needles in the instrument cluster?

[Raymax_2.0t]

platinum? you mean like a brushed aluminum or chrome to match the bezels around the gauges in the instrument cluster?

I'm pretty sure platinum is the name of the gray colored interior. Could be wrong though.


Oh yeah, I forgot to ask. Is the install very involved, like removing the dash, or is it less complicated?

[Sly Raskal]

I'm pretty sure platinum is the name of the gray colored interior. Could be wrong though.


Oh yeah, I forgot to ask. Is the install very involved, like removing the dash, or is it less complicated?

ahhh, i didn't know that was the name of the other color interior for the b7.

[Auditude2.0T]

i think im going to buy one.

[cstarky15]

so no cutting the back of the vent??

[UrKurt]

do you have pictures of the illumination of the white and amber gauges?

[Quattro]

do a search under my sn, I did a review for the gauge...anyone in socal wanna meet up and see the set up in person I am more than willing to arrange something.

I still been lazy with night pics...but it looks sexy at night!!!

man, my cf trim looks nice =)

[Sly Raskal]

I think the one thing that really sets this gauge off compared to the AWE kit is that this one sits much more flush with the vent. Big thumbsup for that!

[ImitationOfLife]

Looks nice. I wish I had the money right now.

[SilverB7FL]

very nice. How long are you guys going to be doing this pricing? Gotta pay rent next week haha

[Sly Raskal]

^^^ DAMN I didn't even notice the introductory price! Oh nose!

[UrKurt]

do a search under my sn, I did a review for the gauge...anyone in socal wanna meet up and see the set up in person I am more than willing to arrange something.

I still been lazy with night pics...but it looks sexy at night!!!

man, my cf trim looks nice =)

Yeah, yeah. Get some night pics, man!:
http://www.audizine.com/forum/showth...ight=vmr+gauge

Anyhow, I think this answers my question, I went ahead an ordered a white one, great price, VMR!

[VMRSport]

Like I mentioned above, installation is very straight forward. You do not have to remove the dash at all. You just have to remove the vents and the driver side kick panel, which consists of 3-4 bolts total.

No ETA on when the introductory price is going to end yet.

We spent a lot of time, figuring out the best angle and position of the vents and gauges, to make sure that it fit flush in the dash area, and that it is still easily viewable from most driving seating positions.

Thanks for all of the comments, let me know if you guys have any other questions.

thanks.

-Don

[RichTJ99]

Do you have any photos (or can you take some) of the installation & T installation, hose routing? I would like to see the whole project before jumping in.

[Raymax_2.0t]

Like I mentioned above, installation is very straight forward. You do not have to remove the dash at all. You just have to remove the vents and the driver side kick panel, which consists of 3-4 bolts total.

No ETA on when the introductory price is going to end yet.

We spent a lot of time, figuring out the best angle and position of the vents and gauges, to make sure that it fit flush in the dash area, and that it is still easily viewable from most driving seating positions.

Thanks for all of the comments, let me know if you guys have any other questions.

thanks.



-Don

Thanks, I'm pretty handy, but I didn't want to start taking apart my entire interior and risk breaking something. I'm glad its a lot less complicated. I will be ordering one of these soon I hope!

[VMRSport]

Yea. I am in the process of doing a complete DIY for our kit, with plenty of pictures and descriptions for each one.

If you want to take a look at how complicated the install is, there are already some DIYs floating around, that should give you a pretty good idea of how everything works, and how hard it will be.

[Auditude2.0T]

i just paypal'd you the money. when can i expect to recieve it??

[RichTJ99]

Yea. I am in the process of doing a complete DIY for our kit, with plenty of pictures and descriptions for each one.

If you want to take a look at how complicated the install is, there are already some DIYs floating around, that should give you a pretty good idea of how everything works, and how hard it will be.

Great, I will wait for your products specific write up. I hope you keep the intro price until I get a chance to see that.

[RedS-line]

great price on a great looking product. for those of us that try to look stealthy (warranty), can a person install the gauge and then simply unplug it and insert the regular vent when taking car in for service without removing the wiring? would this upset the car having the wiring without the gauge attached? would the wires show through the vent or could they be easily tucked in?

[Glassnpowder98]

Great price and a great looking product... Just ordered one!

[Grishbok]

I placed my order last night, as soon as its installed, ill post you pics of it on my A4 and give a write up.

[Glassnpowder98]

Grishbok, We should get together and race to see who can install it faster! Ha JK... did you go to the meet last night and can you VAG the window roll down feature with the key fob for me sometime? Sorry to hijack the thread, but I think I deserve it since I gave you guys an extra buck when I just ordered the boost gauge

[Grishbok]

Yes to all of those. Im excited to install this gauge, we should meet up when the gauges arrive and install them, do a write up, video, pictures, tips n tricks etc. Im really hyped to get this gauge!
(i can vag your window roll down/up at the same time hehe)

[Glassnpowder98]

I'm down for all of the above. Hopefully you know more about installing boost gauges than I do... If not, I'm sure we can figure it out and write a DIY. I still have to write an official DIY for the vinyl trim... one of these days.

[VMRSport]

We usually ship orders out same day or the very next day (business days only, we are closed on the weekends).

You can remove the boost gauge very easily, if you want to bring your car into the dealership, and think that they would hassle you about it. You can leave everything inside the vents, or somewhere close to it, and just plug up the vacuum hose with something, so air doesn't hiss through it with the gauge unconnected.

Let me know if you guys do install it yourself and have questions. I have been installing these on demo and test cars personally, so I know how everything goes together.

thanks.

-Don

[Auditude2.0T]

Do you ship UPS Ground??

[PolishPete]

Do you have any more pictures from farther out? Like from the back seat so we can see how it looks with the whole dash in view?

[VMRSport]

We ship via USPS Priority for all orders within the US. We also typically use USPS for all other orders as well, either priority or standard mail.

I don't have any pictures from further out at the moment. I'll see if I can find some or get some for you. Usually drivers sit in the front driver seat, not the back seats :)

thanks.

-Don

[Quattro]

ill get some pics later and post them up.

[VMRSport]

Cool.

Post it up once you get a chance then.

thanks.

-Don

[VMRSport]

Here are some pictures of it on an A3.

[Glassnpowder98]

Got mine today. Thanks for the quick shipment! I'm gonna try and get it installed by Wednesday and post some pics when its done.

[VMRSport]

Cool, let me know how it goes, and if you need help with anything.

-Don

[VMRSport]

Instructions should be done later this week.

If you have any specific questions regarding install, or anything at all, you can PM/E-mail me, or give us a call.

-Don