s4 rear question.

[doublezero30]

ok i tryed to search, but of course "s4" is too short for the wonderful search engine.

im just wondering if the b6s4 rear is a direct bolt up to my b6a4? is there an s4 lower rear you can buy and bolt up or do i need the whole bumper? and if youve got a part number for either or both of these, that would be awesome! thanks guys. sorry for the repeat question due to poor search ability.

[pondside36]

I believe it is all one piece.. some one correct me if I am wrong.. I was looking at these today since I bought the S4 front..

[heateris]

1 piece, direct swap.

[vdubstreets]

its defintaly one piece 100% sure, and as far as i know you just need to turn the shock absorbers in so they sit in further.

[dougyfresh]

I never had to touch anything. My B6 S4 Avant rear fit right over my B6 A4 Avant rebar without any adjustments.

The S4 rear is one whole piece. I had the lower valence color-matched to the flat black roof rails on my Avant.

[absolutegtr]

You will run into problems if your car is a USP. Other wise it will bolt on just fine

[doublezero30]

not a usp but doing a usp front with s4 rear. thanks for the quick responses, anyone got the part # though?

[pondside36]

It is on geniunvoltswagonaudi.com I was there today

[dougyfresh]

S4 Rear:
-Picture of an S4 rear can be seen HERE
-S4 Rear bumpers use NA Rebar
-Part Number for S4 Rear is: 8E5 807 301 S GRU
-A4 Aluminum strip will not work on S4 Rear without modification
-Part Number for S4 Rear Aluminum Strip is: 8E5 807 443 B 2ZZ

http://www.audizine.com/forum/showthread.php?t=102671

I've got the p/n for the black trim strip if you prefer that. I installed that item instead of the chrome strip. Oh, the A4 strip can't be reused on the S4 bumper. Looks like dogshit.

[dougyfresh]

black S4 trim strip is this: 8E9-807-443-F-5PV

http://www.audizine.com/forum/showth...20#post1699720

[Maverick]

for the sedan, you have to shorten your rebar to make it fit perfectly

[heateris]

for the sedan, you have to shorten your rebar to make it fit perfectly

not true in my case...

Hosted on Fotki

[audimymind]

for the sedan, you have to shorten your rebar to make it fit perfectly

yeah i had to do that. it was a easy fix tho

[Condo]

not true in my case...

You must be one of the lucky ones. I still need to adjust my rebar so my bumper fits right.

[doublezero30]

awesome thanks for all the help guys!

[vdubstreets]

to shorten the rebar you just spin in the absorber correct?

[Maverick]

yes. lube it before you spin it. it's easier.

[A4Dit]

Where are you guys finding S4 rears besides the dealer and how much are they running you?

[J3RR3L]

Where are you guys finding S4 rears besides the dealer and how much are they running you?

http://www.audiporschevwparts.com/

[heateris]

Where are you guys finding S4 rears besides the dealer and how much are they running you?

ebay (jjbumpers, iirc)about $400 used.