Rolling Shot!

[phantom b6]

[A4ringedONE8T]

Ehhh, curious to see others comments on this ...

[phantom b6]

lol I know I'm the only person on the forum that likes this bumper

hate if you must

[akaEsCo01]

You're not the only person, another member has it in black. You need a drop really really bad, and maybe a non rolling shot would have been a better choice to show first.

[phantom b6]

Yeah.. but I'm not looking for approval here just posting the picture since I haven't posted many.

I think what's happening is I'm headed slightly uphill and it makes the front seem much higher... It's actually just 2 or 3 inches off the ground (look at my avatar)

[Firefighter637]

Rolling shot looks good! I know you know that you have to adjust the FMIC or the bumper. What about puttin some mesh on lower half? Looks very open on the bottom. Good lookin car though!

[phantom b6]

Rolling shot looks good! I know you know that you have to adjust the FMIC or the bumper. What about puttin some mesh on lower half? Looks very open on the bottom. Good lookin car though!

thank you.... There is mesh on the side openings just not over the FMIC. I'm still not sure if I like the mesh over it... I've tried it but maybe I need a different kind of mesh.

[JGreen76]

I think it looks good! Nice work!

[A4ringedONE8T]

I think what's happening is I'm headed slightly uphill and it makes the front seem much higher... It's actually just 2 or 3 inches off the ground (look at my avatar)

He wasnt talking about the front bumpers distance off the ground, he was talking about the 4x4 gap between the tire and fender. You also definitely need some low skirts as that front bumper doesnt flow at all with the stock sides

[ilko]

I like it!

[Firefighter637]

Yea, the FMIC look crooked. Some side skirts and rear would make the front flow better with the rest of the car. It just seems like there is a gaping hole in the front where the FMIC is. It definately draws attention to the FMIC which is good. Gives the car an aggressive look.

[A4ringedONE8T]

Just needs a bigger IC then the hole wont look so big

[audi_2.8r]

Phantom were you at the milford mall friday night?

[phantom b6]

yup

[audi_2.8r]

i think we rolled by eachother silver b5 with black roof and black rims

[phantom b6]

yup..

we have meets every Friday at 6PM at McDonalds near Best Buy.. you should come

www.cteurospec.com

[Gom33]

looks good... question about your grill. did you use plasti dip on the chrome part and the audi emblem? trying to debate if i should do the emblem also in plasti dip, cuz if yuo did, it looks good brother!

[Maverick]

it's good to have something different in a nice way. but you are missing something here. that front bumper looks huge. you need some bigger and wider wheels or use some spacers to bring out the aggressiveness of the whole car. this is key!!!
please use chrome rings in the front, the black out rings just hide the grills on your car.
if you like the two tone color idea, maybe black out the roof to go with your door blades.

[phantom b6]

looks good... question about your grill. did you use plasti dip on the chrome part and the audi emblem? trying to debate if i should do the emblem also in plasti dip, cuz if yuo did, it looks good brother!

lol thanks... it's actually just flat black spray paint

[phantom b6]

wheel spacers are on order and s4 door blades will be coming and paint matched soon as well

[El_Chapusca]

Car Looks Wierd Without The Other Side Skirts And Rear Bumper Supporting The Front One, Any Plans For Those

[Carlitos]

wheel spacers are on order and s4 door blades will be coming and paint matched soon as well

don't paint the blades


btw, nice looking car! needs some details, but looks great so far.

[audi_2.8r]

alright sounds good ive been looking for some local get togethers pm me if anything else comes up

[Groove1797]

I think with 19's, an aggressive stance, side skirts, and the most important of all.... a big black FMIC (ER perhaps?).

[trexturk]

kinda just threw everything on, doesnt look right

[vdubstreets]

Phantom were you at the milford mall friday night?

I saw you there too, Did you ever finish your headliner? I was going to come up and ask to take a peek but i was on my way out.

[IronAudi]

You have painted lowers but not were the door blades go, looks kinda wierd, deff need to mesh up the front i like it but there too much going on, maybe if you draw more attention to the center and the IC. CO a must as well.

editted cause i cant type

[J3RR3L]

nice tint..

[phantom b6]

I saw you there too, Did you ever finish your headliner? I was going to come up and ask to take a peek but i was on my way out.

I finished it... but it's started to sag during that heatwave. Me and the GF are going to take it out and re-do it with stronger glue and also re-do where it creased since we didn't know where it would crease when we did it the first time around

[Wags38]

I think it looks great!

[pondside36]

Looking good... hope you have some plans for the sideskirts and rear to match the lines up...

[phantom b6]

I will eventually get the skirts and rear.. keep in mind I've only had the car for 2 months.

The difference isn't as much as it looks between the bumper and skirts.. it's actually only a teensy bit lower. I'll have to get better pictures when it stops raining to show that

[acbaseball186]

i think if you were lower, the bumper would look better...but thats just my opinion :)

[audi_2.8r]

despite what it look likes in the pics..in person when you see the car driving it actually looks legit, and he has only had it for two months too so gotta give credit there