Clear corners question...

**04QuattroTurbo** · 06-23-2008 02:51 AM

How do I get some without buying some cheap aftermarkets that may leak, have problems, etc. Any recommendations?

**B6Lovin** · 06-23-2008 03:15 AM

you just clear corner your stock lights.

follow the DIY on www.a4mods.com <-good shit on that site

**djs** · 06-23-2008 06:25 AM

^^^^ What he said. I followed the instructions at A4mods and did it myself. As long as you're careful, take your time, and follow the steps outlined, you'll be fine. Just make sure you add enough silicone to seal up the drill hole you make or your lenses will fog on the inside.

**Papachristou** · 06-23-2008 07:00 AM

i used a small drill bit instead of a dremel, i just drilled straight down through the tab on both top and bottom then used my finger to break the rest of it out.. i was left with the OEM hole from the tab only, nothing extra had to be dremelled

**doublezero30** · 06-23-2008 07:10 AM

^i did the same deal with the drill bit. works great. ive done my old car and smitty2a4's car. its a pain getting the stupid reflector out, but youll get it eventually.

**Exanimas** · 06-23-2008 02:11 PM

Originally Posted by doublezero30

^i did the same deal with the drill bit. works great. ive done my old car and smitty2a4's car. its a pain getting the stupid reflector out, but youll get it eventually.

Would you be interested in helping another local clear corner his car sometime in the near future? =D

**doublezero30** · 06-23-2008 03:12 PM

^its a possibility. gotta find time though.

**Papachristou** · 06-23-2008 03:13 PM

OP,

this mod is so unbelievably easy! i was scared to do it for months.. i finally went and bought a dremel and some nice bits to work with but i didnt get the thing to hook them on.. so i just made do with the drill and a L shaped pick will make it easier as well...

just do it!

**Exanimas** · 06-23-2008 03:31 PM

Originally Posted by doublezero30

^its a possibility. gotta find time though.

Word. I'm on a fairly tight schedule most of the time too, but I'll PM you when I have time and see if we can set up a day.

**04QuattroTurbo** · 06-23-2008 03:46 PM

Originally Posted by Papachristou

OP,

this mod is so unbelievably easy! i was scared to do it for months.. i finally went and bought a dremel and some nice bits to work with but i didnt get the thing to hook them on.. so i just made do with the drill and a L shaped pick will make it easier as well...

just do it!

LOL, last time you said that I got the APR done...LOL

**A4DJ** · 06-23-2008 04:01 PM

Originally Posted by doublezero30

^its a possibility. gotta find time though.

Make that two?

**Papachristou** · 06-23-2008 04:28 PM

Originally Posted by 04QuattroTurbo

LOL, last time you said that I got the APR done...LOL

and you were quite happy i trust?

modding is a vicious, highly addictive habit! these things should start coming with warning labels like ciggies! im going to sue someone

**04QuattroTurbo** · 06-23-2008 07:01 PM

Originally Posted by Papachristou

and you were quite happy i trust?

modding is a vicious, highly addictive habit! these things should start coming with warning labels like ciggies! im going to sue someone

Yes, not only habit forming and addictive, one is easily persuaded by seeing what others are doing! It must be a sickness. Yes, for the most part, I am happy, happy about the extra "umph" I get at the lower RPM's. Happy about the responsiveness of the throttle. Happy about the the overall power band. Not happy about spending $499 I had not intended originally to spend! ((Shrugs)) oh, well!!