Got my ksport coilovers on

[myownstylett]

I took me a while but I got it done. What you think?

[Firefighter637]

Looks good! How long did it take you? Solo project?

[myownstylett]

It was my first time. The rears took 5 1/2 hours with a buddy helping and the front's I did solo with some help here and there mainly to help pull the stut out about 6 hour's. So a total of 11 1/2 hours. Thanks for the comp

[InTTruder]

Take it up a bit in the rear, maybe 6mm or so (rake).

[cam]

lower the fronts 3-4 turns, but looks good

[manhertm]

How's the ride/handling?

[myownstylett]

Well I went on the Leavenworth drive yesterday and got a chance to test these out. This is my first time with coils so I cant say this is better then that but I had all kinds of driving, City, Corners, and bumps. IMO I think they did well. When there was smooth pavement they road very nice. Im pleased with this setup and dont regret buying them.

[Bee Five]

Perfect drop, looks good

[myownstylett]

Thanks for the comp

[lrg8683]

what did you set the dampening at? i got some for my car, just waiting for some time to install em, need to figure out what setting i want to go with dampening since i'd have to remove everything to adjust em.



drop looks good btw!

[myownstylett]

Well If you want the same drop as me then in the rear I have 1/8th of thread left. And in the front measure from the top of the shock where the black cover is move the cover up and you will see the top. From the top of that to the bottom of the spring is 3" 1/2 inch's set that. Then measure from the same spot, the top of the shock to the bottom of the thicker part of the coil tube. That is 11" and 5/8's. Dont measure to the very botom of the coil measure to the part that sit's on the actual spendal. Make sence. If you are running 18's like me you should be flush with the top of your tiers. I also had to get a full camber kit put in and now Im maxed out on toe. My bottom rear perch is still in but the top is out. Also in the rear the instructions say to put the ajustable part on the bottom but mine is on the top. You'll see why. The 4 brackets that they gave you, I only need 2 and just bent and twisted them to my liking's to hold my brake lines. I called them to see where the hard and soft setting's were set at and they said they are set at what ever so you have to play with it to see what you like. Mine were set at hard I went 8 clicks to soft and they ride great. Hope I helped

[lrg8683]

im thinking im gonna try 9 clicks harder from the softest setting on the fronts.. and 18 clicks in the rear.

[myownstylett]

Irg8683 did you install those coils? If so how do you like them and post pix's