Clear Corner Help??

[Asimko]

I have searched and searched but havn't been able to find a DIY for the CC mod . I have found it for B5 and B6 but no B7. Can someone please point me in the right direction?

[era]

Not much to the CC mod. All you have to do is get the bumper off, then bake your headlights for approximately 5 minutes. Pry open the headlights and knock off the amber piece. The bumper removal is probably the hardest part of the task. Once it's off, the CC mod is a piece of cake. Here are some threads that could help:


http://www.audizine.com/forum/showth...bumper+removal
http://forums.audiworld.com/a4b7/msgs/14104.phtml
http://www.audiworld.com/tech/ext67.shtml

[Asimko]

Do you know what temp. to bake them at? Im just worried about melting my new Xenons.

[era]

When I baked mine, I only did it at 175 degrees for 5 minutes. That was enough to open it up. Hope it helps.

[Asimko]

Thanks for the info it will be a big help. Now I wait impatiently for them to come

[Asimko]

Now that I think about it I will most likely end up doing a DIY for this. Give me a few weeks and it will be up.

[Bllzll]

does anyone have problems with condensation after baking open your headlights????? seems like that would be a problem with this mod.. and i would hate my headlights looking like a '96 cavalier

[A4RingPimp]

http://www.audizine.com/forum/showthread.php?t=105668



DIY install guides

Test Pipe
Clear Corner
Clear Corner #2
Clear Corner Video
Bi-Xenon ECode headlight installation
walk through for ebay vag-com cable
Coilover/Spring Install (no pics)
Coilover/Spring Install w/pics
Data Logging tutorial
Debadge
Bumper/head light removal
Interior trim removal
satellite receiver install
Change hidden EQ settings
Oil change and Snub Mount Install
Non-bose audio upgrade
Rear Valence replacement - no cutting necessary for OEM
Removing bumper reflectors
ECU Removal
K04 Install