how do i go lower?

**madrussian** · 06-20-2008 11:39 PM

i got tein ss coils...

im dumped in the front, but the problem is that i dont have room to screw them any lower in the rear and i got some rake going on.

any ideas?

i was thinking of taking out the actual plates that the springs rest on and you spin to go lower to gain half an inch, anything else i can do?

**80020vr6** · 06-21-2008 01:05 AM

the front is higher than the rear?

**Cargo8** · 06-21-2008 01:24 AM

the front should be higher than the rear. I think if you do what you said you will bottom out the suspension during driving..?

**DGS4** · 06-21-2008 01:28 AM

I think he just wants to go alot lower than what the SS's have to offer.

**Sharkfin** · 06-21-2008 07:34 AM

whats your ride height?

**madrussian** · 06-21-2008 08:38 AM

wow... i was tired.

i want to go lower in the rear.... the front is dumped, the rear isnt.

my ride height is prolly 21" or 22" from ground to fender.... ill measure today, but thats in the front, i want the rear's to be stupid low too.

ill post pics later...

**AudiWxGuy** · 06-21-2008 09:51 AM

The front should be a tad lower than the rear. According to STaSIS the rears should be about 1/8 of an inch higher than the fronts.

**80020vr6** · 06-21-2008 10:23 AM

Originally Posted by madrussian

my ride height is prolly 21" or 22" from ground to fender............... stupid low too.

...

Damn, I thought mine was slammed at 23 5/8th's.

You sure about that measurement?

**evilgabbie** · 06-21-2008 11:40 AM

21 22... wow that's like too low or something lol

**madrussian** · 06-22-2008 11:30 AM

Originally Posted by AudiWxGuy

The front should be a tad lower than the rear. According to STaSIS the rears should be about 1/8 of an inch higher than the fronts.

they're not stasis, they're tein super street coils.

and i will double check the measurement, but im pretty sure its around there. i was at 24" with an inch of thread left... ill take a pic for you guys.