Spacers?

[JGreen76]

I was thinking about getting some spacers for my car. Fedex says my coilovers will be here tomorrow... My excitement makes me want to do more. I have a s-line w/ the titanium package.. What size spacers would you reccomend for a better stance?

Thanks!

[ibiski]

I believe most people use H&R with 10f/12r being the most popular setup. Use the search function.

[aaaudiprotein]

Dependind on the rims, i think most people use 10f/15r.

[Cargo8]

take a ruler and measure length to fender from most outward part of the tire (or wherever you want to line up). That way you can get as close to flush as possible while knowing you wont rub! Otherwise take recommendations of 12/15 or 10 / 12 or 10/15 etc. that other people have. All look great when closer to the fender.

[JGreen76]

Thanks for the heads up!

[Audi Juice]

Im 8mm front 10mm rear and I rub in the back. Didnt before the spacer install.
Also have Titanium wheels

[4Audi]

i believe the offset on my wheels now is +45 offset (b7 A4 special edition), im getting the 19" rs4 reps which are +38 offset. does that mean i need to get 7mm spacer? how does that work?

[Elohite]

Research how offsets work first and remember wheel width has a big part in it too...
Dont rush it and take your time.

[Doctor]

i believe the offset on my wheels now is +45 offset (b7 A4 special edition), im getting the 19" rs4 reps which are +38 offset. does that mean i need to get 7mm spacer? how does that work?

NO NO NO NO NO...Definetely NOT...
That will take you to 31 offset, and your wheels will go of the car...

The lower the offset, the more out of the cars the wheels go

------------------------------------------------------------------------------

Rear Valence+Trunk Air Lip+Mirror Housings+WindowTrim CF'ed, Debadged Trunk, Front+Rear Red Tie Hooks, Engine Cover Removed, Painted WasherFluid+Coolant caps, Toyo Proxes Racing Semislick R888 225.40 (for now), OZ Ultraleggera 8x18 ET45 Black, 76mm Custom Cat-Back Exhaust, OEM BlackMask w/ black Audi Badge, Sparco 33mm Racing SteeringWheel, RUF Snap-off WheelHub, CF ShiftKnob, ColourMatched BrakeCalipers, APex-I TurboTimer black, Custom BilsteinPSS Coils, Tinted Tailights, GReddy Electronic Φ=60 Warning A/F, WaterTemp, OilPress, FuelPress
Defi BFSeries (w/ link) Φ=60, Boost, EGT, OilTemp, + 1, Custom GaugePods by XM Greece, PIAA CityLights Super White and White, Sparco CF Pedals, Simoni Racing SteeringWheel CronoMeter, Sachs Organic Racing Clutch Kit

[Alkemix]

NO NO NO NO NO...Definetely NOT...
That will take you to 31 offset, and your wheels will go of the car...

The lower the offset, the more out of the cars the wheels go

Phew! Close one.

I think I just......yep! I just learned something.

I've been wanting to get VMR 708s too. I got DG so i think it would be pimp... and by pimp i mean smackin bitches on corners and gettin paid for it!

[JGreen76]

Im 8mm front 10mm rear and I rub in the back. Didnt before the spacer install.
Also have Titanium wheels

good to know! I have the titanium wheels too. How do you think 8mm all the way around would do? Think it would rub, and do you have factory sized tires?

[AudiWxGuy]

I have the stock 17" prem. package wheels and I have 15mm spacers in the back and I do not rub.

[Bllzll]

I have the stock 17" prem. package wheels and I have 15mm spacers in the back and I do not rub.

post a pic if your car.. i have the same wheels and i want to see how much better it looks with a nice drop