Vag-Com coding for remote windows

[Jared71482]

Can someone tell me what code I need to enter to allow rolling up the windows with the remote?

thanks

[biketsai]

go to the ross tech website, then click on the tab that says info or something, then find the A4.

[Tifun]

35-Central Locks: -- KWP-1281
VAG-COM Works fine (note: pre-'97 A4's may not have this module).

Recode locking options

[Select]
[35 - Cent. Locks]
[Recode - 07]
Enter the coding below
[Do It!]

Write down the existing coding for future reference.

A4 pre-1998 with Delta radio and anti-theft system
Standard Coding: 03468

A4 pre-1998 with Delta radio, anti-theft system and keyless entry
Standard Coding: 12172

A4 1998+ with Concert/Symphony radio and anti-theft system
Standard Coding: 03340

S4, A4 1998+ with Concert/Symphony radio, anti-theft system and keyless entry
Standard Coding: 16140

Add the following options to your coding number:

+64 Windows up, sunroof close, and windows down with remote.
-04 One touch unlock of all 4 doors and trunk
-1024 Remove horn honk when arming
+32 Auto lock/unlock of doors (Doors lock at 15 mph and unlock when key is removed)

So, if you want to have a 1999 A4 with Concert radio and anti-theft system and keyless entry, and you want to add window control with the remote along with auto-lock, then:
add 03340+64+32= 03436

[LowSantorin]

Sorry to thread jack, i have a cable but no software. Anyone know where i can get it?

[Tifun]

You get the software for free from their website. On a side note, either I am retarded or it doesn't work. I followed the steps and didn't get anything to work, the single button unlock for all doors, and the windows close deal. Mines is a 99.....anybody done this before? How do you get the remote to recognize it?

[bigphil]

You get the software for free from their website. On a side note, either I am retarded or it doesn't work. I followed the steps and didn't get anything to work, the single button unlock for all doors, and the windows close deal. Mines is a 99.....anybody done this before? How do you get the remote to recognize it?

I had this happen as well. If you keep searching vagcom website theres a table for the full binary code somewhere. I had to make my own code up using the table to get mine to work properly last time because none of those codes they published worked for me... seeing as I just disconnected my battery I think I'll have to do it again and recode... should have wrote it down

[Jared71482]

I can only get mine to open the windows and close the sunroof... if I unlock the car by remote and hold the unlock button, the windows will go down untill I release the button. If i lock the can and press the button a second time and hold it, the sunroof only will close...

[Tifun]

I can only get mine to open the windows and close the sunroof... if I unlock the car by remote and hold the unlock button, the windows will go down untill I release the button. If i lock the can and press the button a second time and hold it, the sunroof only will close...

How long are you holding the button for?

I had this happen as well. If you keep searching vagcom website theres a table for the full binary code somewhere. I had to make my own code up using the table to get mine to work properly last time because none of those codes they published worked for me... seeing as I just disconnected my battery I think I'll have to do it again and recode... should have wrote it down

Haha, I'm not that computer literate. It would be nice if this worked though, I've known about it for what seems like forever, never got around to doing it til I posted the info above...

[LowSantorin]

You get the software for free from their website. On a side note, either I am retarded or it doesn't work.

Tried looking at that got confused and gave up lol. Couldnt tell if i was getting software or an interface!? and do i need both? I think ill steal my sister laptop for a bit and give it a shot again.
to rosstech for no mac support!

[Tifun]

You just go to the free downloads and get the latest version....I think it's 704.x. You have to download it, but follow the steps to get it to recognize the cable. You have to recognize the cable before you load the program completely. If you follow it step by step it will work 100%.