City lights

[SEXICÄN]

I have the Hoen Fog lights (xenonmatch is the name), i am looking for a set of city lights that match pretty well with those... Anyone know of or have some pictures of theirs..... TIA

[Audi Juice]

I bought the xenon match fogs from hoen also and they look great. I didnt want to melt the housings so never threw in the city's.

There is all this talk about wanting Xenon match city lights, and the various Led threads that have been popping up. Just do the simple thing and leave the city light plugged in but pull it out of the housing drop it down behind the reflective backing. Cheapest mod, because it costs nothing and now you dont have the ugly city interfering with the Xenon look.

[stifler474]

i have the city lights as well, hoen. But i can't figure out how to put htme in and take the old ones out, they are so delicate it seems like. It is the same installation as teh high beams and low beams?

[SEXICÄN]

I bought the xenon match fogs from hoen also and they look great. I didnt want to melt the housings so never threw in the city's.

There is all this talk about wanting Xenon match city lights, and the various Led threads that have been popping up. Just do the simple thing and leave the city light plugged in but pull it out of the housing drop it down behind the reflective backing. Cheapest mod, because it costs nothing and now you dont have the ugly city interfering with the Xenon look.

Good thinking...

[AudiWxGuy]

That is actually a great idea, how do we do that?

[SEXICÄN]

That is actually a great idea, how do we do that?

I just did it in like 2 mins. just pull the bulb out of the spot and leaving it in the headlight housing.... Mine is resting on the inside cover!

[AudiWxGuy]

Do you just pop open the back of the headlight? I'll give it a shot later tonight. I'm sure it looks much better.

[SEXICÄN]

there are two plasic covers on the back of the headlights. one directly behind the low/high beams and the other behind the DRL and city lights. only going to fit two fingers in and just pull

[AudiWxGuy]

Does it make a difference if it's the bi-xenon?

[SEXICÄN]

nope

[zachf88]

There is all this talk about wanting Xenon match city lights, and the various Led threads that have been popping up. Just do the simple thing and leave the city light plugged in but pull it out of the housing drop it down behind the reflective backing. Cheapest mod, because it costs nothing and now you dont have the ugly city interfering with the Xenon look.

Then you have a random, empty hole in your headlight housing.....

[SEXICÄN]

Then you have a random, empty hole in your headlight housing.....

I'll take a pictures, i bet you don't even notice it...

[AudiWxGuy]

Yeah, take pics. Do you have to take out that piece that runs into the MAF sensor that blocks the left headlight?

[SEXICÄN]

nope, just the intake vent (only held in with two screws)

[AudiWxGuy]

Oh, okay. I'll give this a shot tomorrow..or maybe now. brb

[AudiWxGuy]

Tried to do it. I can't figure out how to take the plastic cover of the headlight housing off...Once I get that, I should be good to go. Where did you put the bulb when you pulled it out?

[whitevdub]

and you don't get a bulb out warning at all??

[SEXICÄN]

i didn't take the bulb out, its still in the housing. If i take it out it's going to give me a warning...


The cover has a plastic tab on top that you just push down.

[Audi Juice]

Then you have a random, empty hole in your headlight housing.....

You will not notice it. Plus if you agonize over it just buy a fake bulb/socket to fill the hole. $50 + for led's or whatever is just lame.

By the way if you guys have a hard time taking them out all you have to do is pull straight back and they pop out.

[SEXICÄN]

You will not notice it. Plus if you agonize over it just buy a fake bulb/socket to fill the hole. $50 + for led's or whatever is just lame.

By the way if you guys have a hard time taking them out all you have to do is pull straight back and they pop out.

It was really easy, i did it in 2 mins (tops) and I can't notice anything

[whitevdub]

i'm going to try this now and see how it looks

[AudiWxGuy]

I couldn't get my hands in there. I'll have to try it again.

[whitevdub]

tried doing it, but i do not know where to put the city light to leave it out of the housing. and to get it out do you just pull hard? i'm afraid i might fuck it up

[AudiWxGuy]

same here. I'm wondering if that light will melt the wires that are in the housing.

[zachf88]

i'll just spend the extra money to get LED's!

[whitevdub]

agreed, im either doing LED's or piaa ion yellow city lights

[AudiWxGuy]

I'm afraid the LED's will be so bright that they will take attention away from the my angel eyes. I want to pull out the Citylight, but I'm not sure how.

[SEXICÄN]

I'm afraid the LED's will be so bright that they will take attention away from the my angel eyes.

angel eyes

Did you trade in your audi for a BMW?

[whitevdub]

what do you guys think i should do...go with piaa ion yellow city lights to match my fogs or go LED

[AudiWxGuy]

They are LED and bad ass. It does not look like a BMW. However, I think they look great on the 335i. I am not against BMW's. In fact, if I had my way, I'd have spent 50k and gotten a loaded 335i. But I couldn't, so I "settled" for an Audi. LOL

[SEXICÄN]

xenon match with the fogs

[whitevdub]

^ i have yellow fogs

[AudiWxGuy]

I have xenon match and they look great!!!