flywheel and PP torque specs

[JDM EJ1 95]

anyone have these?

stock flywheel
vast ceramic

01.5 s4

[DAP]

Flywheel bolts (stretch bolts, always use new ones) are 60nm + 180 degrees

Pressure plate bolts are 20nm

[JDM EJ1 95]

and ft lbs lol.

?

[JDM EJ1 95]

does this sound correct

flywheel

44 lb/ft + 180deg

pp

15 lb/ft

[Daft]

does this sound correct

flywheel

44 lb/ft + 180deg

pp

15 lb/ft

Yes, those values are correct.

Here's a nice little calculator application that you can keep on your PC for converting to/from Nm and Lb. Ft.

Torque Converter - Free torque calculator

[okkim]

Actually the pp bolts are 22 Nm ;)

The flywheel bolts are really hard to tighten if the engine is not properly attached to something. Usually it is hanging on the crane when I do it.

[JDM EJ1 95]

thanks everyone.


i have the engine sitting on the ground for now so it wont be an issue torquing the flywheel on..

[AudiA4_20T]

I use the impact gun, problem solved