19x9.5 Rubba dub dub

[VTAudiA4]

-Staggered
-Front: 19x8.5
-Rear: 19x9.5
-Front: +30
-Rear: +40
-Bolt Pattern : 5X112
-Hub Bore : 73.00





1.) With this info how badly will I rub?
2.) Can I make these fit?
3.) Will I need spacers?
4.) Will I need to roll the fenders?

[VTAudiA4]

Nothing but trolling....Come on guys

[a4fann]

nobody can give you an answer until you get suspension. For now you will just be donkin

you will need hubrings

[VTAudiA4]

Yes but Im just talking stock suspension for now.

[BrokeDown[20V]]

Why not just buy them and test fit them? Sure they will fit, sure your ganna rub.

And its ganna look horrible with stock susp.

[VTAudiA4]

Why not just buy them and test fit them? Sure they will fit, sure your ganna rub.

Well, I cannot afford everything at once. I just spent 4k on engine parts so Im kinda low on cash.

One thing at a time.

And its ganna look horrible with stock susp.

You dont have to tell me the obvious either.

[njm23]

you will have to roll your fenders for sure.. that much i can tell you. Not to many b5's run 19's so your replies will be limited. where is onemoremile, he will know for sure.. ha

[BrokeDown[20V]]

Sorry, I know I prob. came accross like a A**hole.

After spending money on a pretty nice engine set-up... Why go with heavy 19's? Get a nice staggerd set of 17's. Even 18's.

[VTAudiA4]

Sorry, I know I prob. came accross like a A**hole.

After spending money on a pretty nice engine set-up... Why go with heavy 19's? Get a nice staggerd set of 17's. Even 18's.

Well I saw a good deal on Axis penta wheels and they were only available in 19's with that staggered setup for only 1000.

[BrokeDown[20V]]

That is a really nice looking wheel.

[VTAudiA4]

So I researched some more and they don't fit. Took me an hour to figure out that they don't fit. They do come in 18x8 with a maxxis lip (2"lip in front and 3" in the back) but I dont think they are 5x112

[creechsa4]

probably more trouble than it's worth. with a 9.5 rear with 40 offset you will probably rub the upper control arm, will need a 5mm spacer. the fronts will also possibly rub, maybe have to run a stretched setup. i'd go with around a 35 et if you can.

[audiholix]

35et and 225 tires should clear it. question is why you would go with 19's if you just spent $4k for going fast. Not only are 19's heavy, they ride harsh.

[Siena]

They sound like Mercedes fitment.

[////D]

instead of spending 1k on wheels, i would save like 200 more hundo and get some coils, you will be happier with coils on stock wheels rather than 19s on stock suspension, or save that 200 and get cup a cup kit for like 600 and then some used wheels for 600, just my .02

[VTAudiA4]

Yeah you guys are right. I think it was all a spur of the moment thing. I hope the koni GP will still be here when I save some money up for coils.

You guys ned to buy my stuff to help me with my C/O purchase. lol

[98a4]

Wont fit at a decent ride height and without streching like crazy

et40 rear will hit your control arm. I'm on 215/45/17 on a 9.5 et18 and I have 5mm between tire and control arm.

[onemoremile]

^^^ There is the expert on this subject.