A4 S4 Vent Gauge Holder (AWE-type)

**DCVING** · 05-27-2008 09:29 PM

I'm trying to find out how many would be interested in buying an AWE-Tuning type vent gauge holder comparable to the one shown? It would be still as functional but at a much lower price!

This vent would be available for the B5 A4 and S4 and sold as the vent only so you could choose your own gauge.

PM with any further questions. Thanks!

**m5racer** · 05-28-2008 10:00 AM

if its not too expansive - under 50 - i will get one!

**Seerlah** · 05-28-2008 10:03 AM

x2. Maybe

.

I made my own vent guage and it looks alright. Can't really complain about it, yet it is not the prettiest thing. There was actually an individual whom made vent housings for the gauges and was selling them not too long ago. But it was more than $50.

Edit: Here it is

**Ewok_Fetus** · 05-28-2008 10:39 AM

Seems like every 6 months people do this... I started doing the cheap DIY ones and selling them and then two people did it after me... Seems like every Audi should have one by now...

**Revolution02** · 05-28-2008 10:51 AM

I did what Ewok Fetus did you will sell a few then you will get a couple more guys doing the same thing and you would loose your customers so my advice is just make a few and sell those. It was kind of hard getting good customers.

**goody6691** · 05-28-2008 12:03 PM

i just had mine done a while ago. boost and wb a/f. awe wont sell just the pod.

**DCVING** · 05-28-2008 11:18 PM

Originally Posted by goody6691

i just had mine done a while ago. boost and wb a/f. awe wont sell just the pod.

Someone in another post mentioned AWE will sell just the pod but it is for a 45mm gauge (?). I tried calling them today to find out details but no answer -- maybe tomorrow. I'll let everyone know what I find out.

**DCVING** · 05-28-2008 11:21 PM

Originally Posted by Seerlah

x2. Maybe

.

I made my own vent guage and it looks alright. Can't really complain about it, yet it is not the prettiest thing. There was actually an individual whom made vent housings for the gauges and was selling them not too long ago. But it was more than $50.

Edit: Here it is

I checked out that link -- I'm going to go ahead and say I'm looking to have high quality ones made, not hacked up vents with a hole saw. I want a clean, professional look when it's all said and done.

**Naudi_Mat** · 05-29-2008 01:47 PM

Well I'm gonna chime in here and say that the vent pods that I make aren't, " Hacked up with a hole saw". Mine are actually machiced out with a CNC machine. And the fit is nice and snug. Just ask the people that have actually purchased them.