How Do You Install The Smoked Front Refectors

[Six Speed Turbo]

I tried to install them and ran into some issues. I can't get the old orange ones out to get the new ones in.

I have ran into the patience problem more than anything else. Can someone please point me in the right direction please.

[joec500]

turn your wheels so you can get access to the wheel liner screws, remove 2-3 of them and you will be able to reach the reflectors from behind and pinch the plastic in order to remove them, took me about 5-10 mins to do both sides.

[Phantom2.0T]

There is the DIY in the new member guide at the top of the B7 forum. The removal and install should take you about 10 min.

http://www.audizine.com/forum/showth...=1#post1345486

[cstarky15]

HAHAHA it sounds so easy, but it isn't, mine were a PITA. It cut up my arm and even though i got the white tabs pinched it didn't want to come out. I drilled them out. Take a drill, drill in the middle, then get something to pull them out, I knew i wouldn't be reusing the markers so thats why i did it that way.

[whitevdub]

it's so much easier to do the vinyl lens film instead of replacing the actual reflectors. they are darker than the ecs tuning reflectors as well.

[Pure Euro]

Shave'm

[outlaw77]

yea, once I read how these were changed out I said screw it. color matched paint is the way to go or shave them.