Who do I go through for a coolant hose

[Oricle]

Was just moving a couple hoses around in my car a couple minutes ago, and the coolant feed line(rubber hose) going to my GTRS blew right in my face. . Tastes like shit.

Can't find anything from ATP. Should I go braided? Would NAPA have a kit to make my own?

[Nebone]

Wash all that out since G12 Coolant is real poisonous and causes slooow internal demage once consumed.

Contact ATP and they should hook you up.

[Ewok_Fetus]

Wash all that out since G12 Coolant is real poisonous and causes slooow internal demage once consumed.

Contact ATP and they should hook you up.

Actually, if you ingest coolant, you want to take 1-2 shots of hard liquor like whiskey or rum... I shit you not... At work we dealt with some Ethylene Glycol that would corrode an engine within 48 hours... The MSDS states to take 1-2 shots for every 1 oz EGW ingested...

[mike-2ptzero]

You can most likely just buy any rubber hose and put it on yourself. Were both ends of the hose just held on with normal clamps?

[Oricle]

I ended up cutting the hose halfway up, and used an extra adapter I got with my eliminator kit to hook up another half of a hose.

My APR 3" Inlet's hose to the diverter valve was broken as well. Went to NAPA and got a 3" hose.