Will it rub? HELP!

[FrankA6]

ok so i got a 2004 A6 S-Line, lowered on Koni FSD+Eibach springs, and i want to get 18x9 all around with 235-40-18 tires, i have the choice of ET35,45 , which offset should i get and will it rub, please give me some feedback guys, thanks!

[Doc@tirerack]

ET45 would be better

[FrankA6]

Well im looking for somthing like this guys car, he has 18 inch and i want the lip to be about this size also have the wheel out to the fender like his, http://www.audizine.com/forum/showth...highlight=18x9

[VMRWheels]

Well if you want that kind of look, your going to have to stretch your tires, camber your alignment, and roll your fenders.

-Charles@VMRWheels

[FrankA6]

well what should i do, i just want the wheel to be out to the fender and not rub, what size should i get for best look and no rubing? 18x9 35 or 45ET ? and i will use 235/40/18 unless theres a better size for it? thanks guys

[VMRWheels]

The lowest i would recommend without any modifications of the fenders and alignment would be 18x8.5" +32 with a 235/40/18 tire. That should be sitting very flush with your fenders.

-Charles@VMRWheels