how many people would want this gauge pod and opinions

[NoLeafClover]

What do you guys think of it, me and my buddy custom made this in one weeked.
thanx
Bler

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[2ndEngineS4]

It def has potential but I think we need better pictures.

[NoLeafClover]

how can i post bigger pictures on here?? they come out to small

[2ndEngineS4]

Go to a photo hosting site like photobucket.com and upload the full size pictures. Then copy and paste the image code from the site (IMG Code) into your post.

It will look something like this:
_____________

blah blah blah. . . .

[IMG]http://i206.photobucket.com/albums/madface.jpg[IMG]

_____________

and

viola!



you have picture.

[Rated S]

If you don't want to sign up for anything you can use:


www.imageshack.us
to host pictures with no account.
Same steps though as above.

[NoLeafClover]

thanx guys

[IMG][/IMG]

[HotSauce]

I'd love to have that for my Allroad...I'd pay a few for that pod.

[FrimmelNoJerz]

i dont like it.

[Das General]

Nice idea, but it doesn't even come close to matching the interior.

[dc878mmm]

I really like the new AWE centermount led gauge more. I agree that the blue doesn't really fit the interior.

[kido81]

the beauty of this pod is that we could match it to anything. we will make one more to match the textured interior dash, one that will match you fabric on the post or we could paint it any color. also as for the gauge you could use any gueage you want but you must let us know if you will be using a smaller guage.. in mine we will use the AWE guage. i will post up pic when completed...

[HotSauce]

Nice idea, but it doesn't even come close to matching the interior.

I don't think that's the finished product. I was basing my opinion on placement and shape.

It's impossible to find a pod for the Allroad, so this looks like something decent.

[IamEzraM]

looks pretty bad on the blue interior

[NoLeafClover]

looks pretty bad on the blue interior

its a black interior, the flash from the camera made it look blue
and again it could b painted any color u want textured or not. i wanted to get opinions on placement and shape.

[Rajan147]

how do you route all the tubing and wiring? drill a hold in the dash?

[NoLeafClover]

how do you route all the tubing and wiring? drill a hold in the dash?

a 3/16" th hole through the vent duckt is enough for the boost tube and wiring for the light. it all comes out next to the fuse box were u can connect the light and run the tube to the engine bay. installation is very easy