Seat Cupra R Lip (pics)

[AudiRacerS4]

I thought some of you guys would appreciate this since there are really no lips out there for the S4 bumper. Its the Seat Cupra R lip and can be had for $90-119 depending on where you purchase it from.

[ChumbaWumba]

its nice...i like

[S4-ORCE]

it looks nice, MUCH better than the other ones

how did you mount it?

[ChumbaWumba]

your bumper makes it look like your drive side is on jackstands

[S4-ORCE]

your bumper makes it look like your drive side is on jackstands

[O_O] look again

[AudiRacerS4]

your bumper makes it look like your drive side is on jackstands

thats because it is the back of the car is jacked up i had to re weld my broken exhaust hanger

[AudiRacerS4]

it looks nice, MUCH better than the other ones

how did you mount it?

screws and bolts from home depot

[badassb5]

Looks good! Nice and subtle

[ChumbaWumba]

thats because it is the back of the car is jacked up i had to re weld my broken exhaust hanger

damnit...i feel like an assclown

[sCeRaXn]

Looks good man. Do you have any pics of it from the side? Or atleast one where you can see how for the side of the lip goes back on the bumper? It looks like the side is a little shorter than the bumper, but its hard to tell from those pics. Either way, i think it look pretty damn good!

[Dowskeet]

I like it. Defiantly gets my vote.

[evilgabbie]

looks good but it's a little too busy for me.. too much going on in the front

[nyca4tq]

Would it fit a stock b5 a4 front bumper?

[Dr.Duct]

do you have a complete side view of this?

[stapo69]

I like that! Can get them from SEAT here in the uk for about £19, so less than $40! Might be worth a bash I think, not much to lose if it don't work!

[AudiRacerS4]

do you have a complete side view of this?

i'll snap a pic as soon as it stops raining out

[BastardS4]

PN#? thats really nice.


It will go great with my home depot roof spoiler. :)

[updaboost]

Not bad...but looks a little mismatch on the sides..

[S4shpion]

i like it, definately be my next mod.

[lil' is 300]

I'm shocked. The lip actually flows well with the stock bumper, what a nice surprise.

I may actually consider this when everything else is said and done. Maybe i'll go for the Champion S4 look

[Matt@JHM]

Found some other pictures, I think it looks pretty good. None of these are my car.






A4 Bumper:


And kinda how you would install it:


I'm sure you can run it with the full radius of the underside though.

[lil' is 300]

Since it's so cheap, I would rather scratch that up than the bottom side of the bumper (mine is really bad). I think it would be pretty damn sexy in carbon fiber too.

[JMTx86]

where can I purchase one?

[lsc2g]

i had one on my mk4 jetta with the pzwo front end.. i think its not wide enough to fit the B5 bumper needs to be extended like 2-3" each side.. doesn't look bad tho.. props for doing something different

[AudiRacerS4]

where can I purchase one?

ECS Tuning sells them

[BastardS4]

any idea where on the site? couldnt find it.

[lil' is 300]

any idea where on the site? couldnt find it.

I believe this is it:

http://www.ecstuning.com/stage/edpd/...lipbackinstock

^ It's out of stock until May 29th it seems.

Dynamic Motorsports is selling it much cheaper here:

http://dynamicmotorworks.chainreacti...7acfce8a93e4d2

^ It's also out of stock though.

[wasup0818]

what s the benifit having the lip?

[lil' is 300]

what s the benifit having the lip?

Looks, nothing more.

[Reich]

Does it fit perfectly on the s without triming alot?

[Reich]

what s the benifit having the lip?

The reason i consider this, is to ram more air to my smic's.

[Das General]

looks sweet but i would snap that in pieces with my ride height.

[Reich]

looks sweet but i would snap that in pieces with my ride height.

Same with me but i would try it.

[lil' is 300]

$89 is pretty cheap though. Even if you do bust it, it's not gonna break the bank to replace it since you don't paint it.

I'll probably end up getting one of these for shits and giggles over the summer to see how I like it in person.

[AudiRacerS4]

Does it fit perfectly on the s without triming alot?

you need to trim a little bit off the ends to make it fit flush with the sides of the bumper

[AudiRacerS4]

yeah i honestly see this lip lasting no longer than a week with my ride hight and our lovely NJ roads

[skunkoncrunk]

it looks nice, MUCH better than the other ones

+1.

[slammed_nogaro]

im guessing all you have is a yellow bulb in your high beam... for the yellow in it?

[mike's machine]

I always liked the flat carbon piece .
Do you guys know what I'm talking about?
Is there one for S4?

[RuS4ty]

I actually like it also.

hah and yeah good luck keeping that thing in one piece AudiRacer.