VMR Wheels by Velocity Motoring - INTRODUCING THE ALL-NEW V710 !

[VMRWheels]

VMR Wheels by Velocity Motoring
INTRODUCING THE ALL-NEW V710

Features

Based almost entirely on customer review and comments, this wheel is designed to cater specifically to the forum community. The latest trend appears to remain with a mesh design, so the V710 was made to suit that need. The V710 has a very aggressive concave allowing for clearance on virtually all big brake kits (BBK's). There is also a very aggressive lip design to compliment the concavity of the wheel. We finish by adding details around the edge of the spokes and elevated the centercap area. Aside from showing any big brake kits you may install under these wheels, these should be a little easier to clean :)

Production & Shipment:

Initial color for the first production will be our popular Hypersilver finish. Of course, more finishes will be introduced based on demand and overall feedback. Audi specific size will be 19x8.5 ET35, 5x112, 57.1 center bore. Expect the first sets of these to be available early/mid July. Quantities are going to be limited, and we expect this to sell out before the shipment arrives. We will begin to take pre-orders once the ETA is set in stone.

Pricing will be determined once final testing has been completed but expect it to be south of our V715 pricing.

[ny2flb7a4]

They look good. Can't wait to see them on a B7.

[Pure Euro]

No staggered with a concave face? Or is that in the works?

[Rotond0000]

omg those are pretty dam hot!

[Louis J.]

Charles, these look very similar to the M3 Competition pkg wheels. I know you make those reps and saw them on a friend's M3. They look fantastic. Is this basically what these are with A4 offsets and bolt pattern? When can we expect to see them in gunmetal? I was getting ready to pick up a set of RS4s in gunmetal but I might buy these ones instead.

[vtracer20]

i would also like to know about staggered setups :) the over all design would work great for staggered setups :) :)

[swoardrider]

How much do they weigh in a 19x8.5 and can you guys do custom offsets? I'm looking for an offset in the low 40's

[era]

I wanna see them on a B7! I think they would look good

[Capt. Obvious]

These remind me of a modernized version of the old school TSW VX-1.

You NEED to make a staggered version of these wheels!

[INTEGRATION]

Sick! It's like a cross between the classic BBS 1-piece designs mixed with a bit of HRE's monoblock. I like...and I'm very tempted...

[MarkChai]

Nice work. Much nicer than the V715's! it'll be interesting to see how they look with the diff. Audi models.

[3.2some]

Sick! It's like a cross between the classic BBS 1-piece designs mixed with a bit of HRE's monoblock. I like...and I'm very tempted...

I agree, those look like my dreamwheels, the P40 monoblocks.....VMR, you make them in black, I buy them, we're all happy

[4RingRook]

Sick! It's like a cross between the classic BBS 1-piece designs mixed with a bit of HRE's monoblock. I like...and I'm very tempted...

I thought the same thing! Nice wheel irregardless.

[renz609]

i would also like to know about staggered setups :) the over all design would work great for staggered setups :) :)

There will most likely be staggered setups but for BMW's. Same deal with the V715.

[supamannn99]

VMR- is it possible to make them in gunmetal with a polished chrome lip?

[outlaw77]

those are some nice rollers. I think they would look great on the b7.

[VMRWheels]

There will most likely be staggered setups but for BMW's. Same deal with the V715.

Staggered setups will be available for BMW only at this time. However, if there is enough interest for the Audi market, we might look into doing a one time group buy for staggered 5x112. If this does happen, it will be later on down the line.

[FlashA4]

+1 for staggered.
and are their any other color ideas in the works?

[HeHateMe]

those would look good in all black

[Phrost]

Those look very good!

[tomasmdiego]

ill take them!! let me know pricingggg

[Auditude2.0T]

They looking nothing like the new HRE's:)

http://www.hrewheels.com/monoblok/mercedes/m40/

Those are some hot wheels. Going to make a 19x9" for RS4's???

[ABanT]

Those are so nice! Imagine in a matte black finish. Damnnn. Who wants to buy my rims? lol

[SGVA4]

Im interested in staggered set up as well...

[nadroj81]

They looking nothing like the new HRE's:)

http://www.hrewheels.com/monoblok/mercedes/m40/

Those are some hot wheels. Going to make a 19x9" for RS4's???

[Phrost]

haha HRE replicas The concave centers where the lugs go in and the lips are a tad different. Still looks kickass though!

ib4peoplebuytheseandputHREcentercapsonthem

[80020vr6]

I would be in for matte black and an et 38.

[leo_yuen_]

i will take a set on matte black....and hre center cap...lol

[snosk8tr123]

can we get it without the bulging center cap lol

[jayuuey]

I'll definitely be ordering a set when a darker color comes out. Hyperblack or flatblack would be great.

[Alkemix]

for those who lack the imagination to do this in their head, can someone photochop this wheel onto a B7? I really need to see it
first.



GOD, that looks so sick!

[windextor]

for those who lack the imagination to do this in their head, can someone photochop this wheel onto a B7? I really need to see it
first.

if they look anything like this photoshop then i need a set immediately

[nadroj81]

make a set in 21 and i will have a early spring wheel for my a8

[AJS1]

Will you be making them in a possible 20" for the A5/S5 community?

Andrew

[baaudi]

if they look anything like this photoshop then i need a set immediately

Excellent, now pshop it onto a black b7 since I have absolutely no imagination.

[windextor]

Excellent, now pshop it onto a black b7 since I have absolutely no imagination.

[windextor]

holy sh*t these are going to look unbelievable on my car...SING ME UP NOOOWWWWWWWWW!!!!!!!!

[Louis J.]

Any chance for a photoshop of the black car with gunmetal wheels and blacked out trim (titanium)?

[windextor]

Any chance for a photoshop of the black car with gunmetal wheels and blacked out trim (titanium)?

WAY SICK!

[INTEGRATION]

I second for having a set in matte black