Audizine - An Automotive Enthusiast Community

Results 1 to 5 of 5
  1. #1
    Stage 2 Banner Advertiser Four Rings jaybquick@JHM's Avatar
    Join Date
    Aug 24 2005
    AZ Member #
    7701
    Location
    Lathrop, CA

    JHM "solid" linkage upgrades back in stock

    Guest-only advertisement. Register or Log In now!
    Just so you know we have them back in stock. We ran out about a month ago and got them back in about a week ago. This time due to a supplier that couldn't keep up. Got a new supplier for that part, now all is well.

    All our other products are in stock as well.





    Introducing the JHM "Solid" Linkage Upgrade for the B5 S4.

    Stock Vs. JHM Disassembled


    Stock Vs. JHM Assembled


    Stock Vs. JHM Fully Assembled



    This is the final piece in the trio of upgrades for the shifting of a B5 S4. We are already selling "solid" shifters and "solid" stabilizer bushings. This will now complete all the possible upgrades to make your B5 S4 shift with maximum efficiency with the most amount of feedback and feel possible. It works with any stock or aftermarket shifter, for best results our shifter and stabilizer bushing is recommended.


    View the tell all comparison video to the stock linkage here: http://audishifter.com/videos/JHM_B5...parisonWeb.wmv

    View the installation video here:http://audishifter.com/videos/JHM_B5...ge_Install.wmv


    The cost on this unit will be $189.99. I did all I could to get prices down. It was just difficult since we had to purchase an OEM piece to modify for each llinkage, $80 retail for this piece alone. All in all I have just under $100 tied up into the hardware for for each peice, NOT counting the modifications we make to the bearing and the OEM part and the parts we make for this kit to work. However due to popular demand and numerous requests here it is.


    BUY IT HERE ->http://www.shop.jhmotorsports.com/pr...0&productId=70


    Visit our store HERE for all our products.--> http://shop.jhmotorsports.com





    I had to share this picture. My machinist cuts all the knobs off the stock linkage end pieces then drills them for me. Well I guess he got bored becaust he sent me this from his cell phone when he finished this last batch. I thought it was quite funny, so I thought I would share.

    ATTACK OF THE KNOBIES (is what he titled it)

    JHMotorsports AZ tuner spotlight VIDEO
    Check out our 11 and 10 second passes on YouTube

    B8 S5 4.2l - JHM Stage 1 SC Kit (ET: 11.8 @ 119mph) -- B6 S4 - JHM Stage 2 SC Kit (ET: 11.1 @ 128mph) – JHM Nitrous (ET: 12.29 @ 117mph) - JHM Bolt Ons -ALL MOTOR (ET: 12.70 @ 111mph) -- B5 S4 - JHM RS6-R (ET: 10.8 @ 130mph)

  2. #2
    Veteran Member Three Rings Dowskeet's Avatar
    Join Date
    Aug 10 2007
    AZ Member #
    20208
    Location
    Maryland

    Re: JHM "solid" linkage upgrades back in stock

    Stimulus check here I come..

  3. #3
    Stage 2 Banner Advertiser Four Rings jaybquick@JHM's Avatar
    Join Date
    Aug 24 2005
    AZ Member #
    7701
    Location
    Lathrop, CA

    Re: JHM "solid" linkage upgrades back in stock

    Hopefully for my sake many others have the same thought process. Stimulus check = more mods. :)

    JHMotorsports AZ tuner spotlight VIDEO
    Check out our 11 and 10 second passes on YouTube

    B8 S5 4.2l - JHM Stage 1 SC Kit (ET: 11.8 @ 119mph) -- B6 S4 - JHM Stage 2 SC Kit (ET: 11.1 @ 128mph) – JHM Nitrous (ET: 12.29 @ 117mph) - JHM Bolt Ons -ALL MOTOR (ET: 12.70 @ 111mph) -- B5 S4 - JHM RS6-R (ET: 10.8 @ 130mph)

  4. #4
    Active Member Four Rings
    Join Date
    Dec 11 2006
    AZ Member #
    14100
    Location
    Boston

    Re: JHM "solid" linkage upgrades back in stock

    I have on laying around this about to go in next week.

    Are all 6 speed linkage upgrades the same, no matter what year?
    Stage 3+ RS6's

  5. #5
    Stage 2 Banner Advertiser Four Rings jaybquick@JHM's Avatar
    Join Date
    Aug 24 2005
    AZ Member #
    7701
    Location
    Lathrop, CA

    Re: JHM "solid" linkage upgrades back in stock

    Quote Originally Posted by deb38 View Post
    I have on laying around this about to go in next week.

    Are all 6 speed linkage upgrades the same, no matter what year?
    The linkages are the same for all 00 - 02 S4s. They also fit B6 A4s until 03.5. Looking to verify fitment or adjust the kit on more models in the near future.

    For whatever reason Audi changed only the rods and not this portion of the linkage. The shifters and the stabilizer rod bushings (early or late) are obviously different but luckily the linkage fits both.

    JHMotorsports AZ tuner spotlight VIDEO
    Check out our 11 and 10 second passes on YouTube

    B8 S5 4.2l - JHM Stage 1 SC Kit (ET: 11.8 @ 119mph) -- B6 S4 - JHM Stage 2 SC Kit (ET: 11.1 @ 128mph) – JHM Nitrous (ET: 12.29 @ 117mph) - JHM Bolt Ons -ALL MOTOR (ET: 12.70 @ 111mph) -- B5 S4 - JHM RS6-R (ET: 10.8 @ 130mph)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.