Audizine - An Automotive Enthusiast Community

Results 1 to 2 of 2
  1. #1
    Stage 2 Banner Advertiser Four Rings jaybquick@JHM's Avatar
    Join Date
    Aug 24 2005
    AZ Member #
    7701
    Location
    Lathrop, CA

    JHM B5 S4 "solid" linkage upgrades back in stock

    Guest-only advertisement. Register or Log In now!
    Just so you know we have them back in stock. We ran out about a month ago and got them back in about a week ago. This time due to a supplier that couldn't keep up. Got a new supplier for that part, now all is well.

    All our other products are in stock as well.





    Introducing the JHM "Solid" Linkage Upgrade for the B5 S4.

    Stock Vs. JHM Disassembled


    Stock Vs. JHM Assembled


    Stock Vs. JHM Fully Assembled



    This is the final piece in the trio of upgrades for the shifting of a B5 S4. We are already selling "solid" shifters and "solid" stabilizer bushings. This will now complete all the possible upgrades to make your B5 S4 shift with maximum efficiency with the most amount of feedback and feel possible. It works with any stock or aftermarket shifter, for best results our shifter and stabilizer bushing is recommended.


    View the tell all comparison video to the stock linkage here: http://audishifter.com/videos/JHM_B5...parisonWeb.wmv

    View the installation video here:http://audishifter.com/videos/JHM_B5...ge_Install.wmv


    The cost on this unit will be $189.99. I did all I could to get prices down. It was just difficult since we had to purchase an OEM piece to modify for each llinkage, $80 retail for this piece alone. All in all I have just under $100 tied up into the hardware for for each peice, NOT counting the modifications we make to the bearing and the OEM part and the parts we make for this kit to work. However due to popular demand and numerous requests here it is.


    BUY IT HERE ->http://www.shop.jhmotorsports.com/pr...0&productId=70


    Visit our store HERE for all our products.--> http://shop.jhmotorsports.com




    For all you B6 and B7 6-speed owners, I will be looking into the changes I will have to make to get this to fit your cars in time. I am currently verifying the stabilizer bushing fitment on other models.



    I had to share this picture. My machinist cuts all the knobs off the stock linkage end pieces then drills them for me. Well I guess he got bored becaust he sent me this from his cell phone when he finished this last batch. I thought it was quite funny, so I thought I would share.

    ATTACK OF THE KNOBIES (is what he titled it)

    JHMotorsports AZ tuner spotlight VIDEO
    Check out our 11 and 10 second passes on YouTube

    B8 S5 4.2l - JHM Stage 1 SC Kit (ET: 11.8 @ 119mph) -- B6 S4 - JHM Stage 2 SC Kit (ET: 11.1 @ 128mph) – JHM Nitrous (ET: 12.29 @ 117mph) - JHM Bolt Ons -ALL MOTOR (ET: 12.70 @ 111mph) -- B5 S4 - JHM RS6-R (ET: 10.8 @ 130mph)

  2. #2
    Stage 2 Banner Advertiser Four Rings jaybquick@JHM's Avatar
    Join Date
    Aug 24 2005
    AZ Member #
    7701
    Location
    Lathrop, CA

    Re: JHM B5 S4 "solid" linkage upgrades back in stock

    Clarification. There was a question regarding these being different for early and late S4s like shifters and other items. They fit ALL 00-02 B5 S4s. This part of the linkage is the same on all.

    JHMotorsports AZ tuner spotlight VIDEO
    Check out our 11 and 10 second passes on YouTube

    B8 S5 4.2l - JHM Stage 1 SC Kit (ET: 11.8 @ 119mph) -- B6 S4 - JHM Stage 2 SC Kit (ET: 11.1 @ 128mph) – JHM Nitrous (ET: 12.29 @ 117mph) - JHM Bolt Ons -ALL MOTOR (ET: 12.70 @ 111mph) -- B5 S4 - JHM RS6-R (ET: 10.8 @ 130mph)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.