VMR Wheels by Velocity Motoring - INTRODUCING THE ALL-NEW V710 !

[VMRWheels]

VMR Wheels by Velocity Motoring
INTRODUCING THE ALL-NEW V710

Features

Based almost entirely on customer review and comments, this wheel is designed to cater specifically to the forum community. The latest trend appears to remain with a mesh design, so the V710 was made to suit that need. The V710 has a very aggressive concave allowing for clearance on virtually all big brake kits (BBK's). There is also a very aggressive lip design to compliment the concavity of the wheel. We finish by adding details around the edge of the spokes and elevated the centercap area. Aside from showing any big brake kits you may install under these wheels, these should be a little easier to clean :)

Production & Shipment:

Initial color for the first production will be our popular Hypersilver finish. Of course, more finishes will be introduced based on demand and overall feedback. Audi specific size will be 19x8.5 ET35, 5x112, 57.1 center bore. Expect the first sets of these to be available early/mid July. Quantities are going to be limited, and we expect this to sell out before the shipment arrives. We will begin to take pre-orders once the ETA is set in stone.

Pricing will be determined once final testing has been completed but expect it to be south of our V715 pricing.

[jrau13]

Damn these are nice! They look like the HRE monoblocks which are sweet.

[colonelburke]

Can't wait to see these on a B6 S4, and willing to be a test vehicle of course.

[jrau13]

Ahhh good idea!! Im local so if you need a test vehicle let me know.

[InTTruder]

I like the 7/14 spoke pattern!

[Robrich23]

Price?

[mxrz]

Sweet, I'll be ordering a set this summer.

[colonelburke]

Price?

Says it is still to be determined, but south of the price for the V715. I looked on their site and did not see a price, but if I recall, it was pretty reasonable.

[VMRWheels]

Just to give you a ballpark, our V715's are $999 for the set of 4.

[jayuuey]

hey charles, how much concavity will these have for our audis? any side view shots?

thanks.

[colonelburke]

hey charles, how much concavity will these have for our audis? any side view shots?

thanks.

x2

[nuctech]

How Much Will They Weigh? 18''

[channad]

it bears a striking resemblance to these:

[VMRWheels]

Final weight will be announced once the wheel is done with its finishing touches in testing. Between the HRE's is that our wheels have a larger lip if you take a good look at them.

-Charles@VMRWheels

[RAudi Driver]

If the quality is on par with the CSL's then no thanks.

[mxrz]

If the quality is on par with the CSL's then no thanks.

What's wrong with the CSL wheels?

[SoFresh]

Im tired of them beating around the bush, I want this design... any other companies have similar wheels in 19's other than VMR and HRE? In the $1k and below price range for a set of 4?....

I emailed VMR, wanting to make an order or pre-order, and they couldnt tell me colors, or price, or if they would have an offset for my A3.... so not too happy with the customer service as of now...

[colonelburke]

They look more concave than the HREs in addition to the aforementioned lip difference.

[SoFresh]

any updates? I really want a set... make an offest for the A3!

[Peter@VMRWheels]

What's wrong with the CSL wheels?

The last time I checked with my BMW customer base, Theres nothing wrong with our CSL wheels

[Peter@VMRWheels]

Im tired of them beating around the bush, I want this design... any other companies have similar wheels in 19's other than VMR and HRE? In the $1k and below price range for a set of 4?....

I emailed VMR, wanting to make an order or pre-order, and they couldnt tell me colors, or price, or if they would have an offset for my A3.... so not too happy with the customer service as of now...

any updates? I really want a set... make an offest for the A3!

No updates yet...

We've provided as much info as we have on hand. All the information we have at the present moment including color, ETA, and estimated price is concretely stated in the first post.

We will continue to answer any specific questions that are not covered in the first post.

[quattroanillos5]

is that the actual pic of 19x8.5 wheel? or is that wheel wider? If that"s the actual profile I'll buy a set now or when ever they come in....

[myang917]

I'm in for a set if they produce a fitment for the A3. 18x8.5 like the V708 or 18x8?

[mnkyA4]

Know off hand if these would clear B5S4 brakes? I'm hoping so since your others don't w/o spacers

[VMRWheels]

Know off hand if these would clear B5S4 brakes? I'm hoping so since your others don't w/o spacers

Yes these will clear B5S4 brakes. And as for the others, we have some that will clear the B5S4's, and others that wouldn't. For specific fitments please e-mail us.

[VMRWheels]

Friday night update: ETA is mid-July.

[mxrz]

VMRWheels, I don't think this was answered yet... The picture, is that how the A4 fitment wheel is going to look like (19x8.5 +35)? Or was that pic made with a wheel that is wider or has a more aggressive offset?

[tilt]

any plans for 20s?

[b00st]

for me, its all about wheel weight. do we know a wheel weight yet? i'm game if the weight is right!

[mxrz]

Don't expect less than 26lbs

[doublezero30]

not available in 18x8.5?? ide be interested in 18's. preferably in gunmetal.

[b00st]

Don't expect less than 26lbs

then i'll do some 18x8.5

[VMRWheels]

VMRWheels, I don't think this was answered yet... The picture, is that how the A4 fitment wheel is going to look like (19x8.5 +35)? Or was that pic made with a wheel that is wider or has a more aggressive offset?

MXRZ, that pic is 19x8.5. I have a 19x9.5 picture and the curvature is more angled.

[VMRWheels]

19's first, then 18/20 next. Regarding the weights - they *should* be around 25-27 lb range. They are average for 19" cast, and a wheel+tire is basically the same weight as an OEM wheel+tire. You won't save much weight off the OEM unless you go forged, but you might as well use that cost difference to buy cast + chip or turbo upgrade :)

[mxrz]

MXRZ, that pic is 19x8.5. I have a 19x9.5 picture and the curvature is more angled.

Sweet, I can't wait to get mine

[AudiWxGuy]

I like those. Can't wait to see them on a B7 A4. If you guys need a test car, I'd love to do it!!!

[20AE428]

Still no answer regarding an A3 fitment? Questions been asked a few times why don't you fill us in on whether or not you will be making something in this for A3's/GTI.

[S4J]

it bears a striking resemblance to these:

Wow, the VMR looks better than the HRE due to the concaveness. Beautiful wheel VMR . All those nooks and crannies would drive me nutz for cleaning though .

[JMVant]

any 1 have a shot of these on a b6 with 19's?

[nitrorocket]

Will the 19"x9.5" fit an '02 A6?? Would that bring the rim out past the wheel well??