my car tell me what you think

[my 1.8t]

http://s219.photobucket.com/albums/c...t=IMG_0703.jpg

[fred2ka4]

Here you go .......

[my 1.8t]

hay thanks did not know how to post it that way so thats why i did the link but thanks

[Overboostin]

looks good

[NK2007]

Looks clean, but needs cleared corners and debadged trunk imo

[my 1.8t]

its a work in progress and yes im going to debadeg it what is the easyest way to do that

[my 1.8t]

and about the clear corners its a one piece headlight

[coleA4]

Easiest way is a hairdryer, goo gone and a chair. It takes a little while.

[my 1.8t]

how hot do i get it

[the_pirate]

how hot do i get it

until you can peel it off....its pretty easy get some fishing line works like a charm!

you can do the clear corner mod for the one piece headlight. i did it on mine. do a search i'm sure you'll find the write up on how to do it.....

looks good. nice and clean!

[my 1.8t]

thanks for all the info and thanks for the feed back on the car

[my 1.8t]

where should i go to find the write up

[coleA4]

http://audidiy.com/

[my 1.8t]

hay thanks that site will help me with alot of stuff

[Matt@JHM]

Looks clean man, I like the rims.

[kevin12]

Clear Corner Mod
1 http://audizine.com/forum/showthread.php?t=14104

2 http://www.audiworld.com/tech/ext5.shtml

[fred2ka4]

and about the clear corners its a one piece headlight

I followed the write up from Audiworld and it worked great. It's not that hard to do but you do have to be patient. The results are well worth the effort.

Before:





After:

[my 1.8t]

that does look way better well you guys just gave me something to do on my days off thanks again

[Kronic Budz]

i say black out the trim on the grill and debadge it like u said and it will look clean. Nice car

[Stampy]

Propa'

[sean1.8t]

and about the clear corners its a one piece headlight

ah yes, n00b status!

i was once right where you are. then i found the forums and my modding habbits and car's have never been the same! search around, read the sticky's in the DIY section, and don't be afraid to ask questions!

[my 1.8t]

thaks for all the feedback and for the options im going to debadge it today

[FACT]

that ride height is one of the best I've seen

[my 1.8t]

hay thanks man i have 18x8 and a drop springs thats it for suspention

[my 1.8t]

ok guys kronic budz is telling me to blackout the trim on the grill. yes i want to do that but my question is do the rings to or leave them crome and i debadged the trunk today and left the rings should i take the rings off to or black them out also and should i use flat black

[AudiSport12]

Car looks good man!

ok guys kronic budz is telling me to blackout the trim on the grill. yes i want to do that but my question is do the rings to or leave them crome and i debadged the trunk today and left the rings should i take the rings off to or black them out also and should i use flat black

Just do the trim in flat black. Leave the rings alone on both the front and back IMO

[my 1.8t]

is that your ride and if it is that is so sick and what about the trunk rings

[AudiSport12]

is that your ride and if it is that is so sick and what about the trunk rings

Thanks! As for the trunk rings, I like them being the only badge on the back

[my 1.8t]

so i take it that is your ride what front mount is that

[AudiSport12]

Ebay special
just-intercoolers is the ebay seller name
cxracing.com


All you need to know:

http://audizine.com/forum/showthread...om+intercooler

[my 1.8t]

i found a front mount but dont know what pipe kit to get

[AudiSport12]

Well if you have the intercooler core, just buy the piping that I listed in that thread from just-intercoolers. Email the seller and tell him what you want and he'll make an order for you.
[email protected]

[my 1.8t]

i found a whole kit that will fit my car for like 220$ shiped 27Lx6Hx2.5thick does that sound like one that would be ok i messured it and it looked like it would fit but will i have to cut up my bumper

[my 1.8t]

also do you know where i cn get a euro plate and holder i have one of those big plate holder and it has some big holes in the bumper and if i do a front mount i need to get rid of the big one thats why i want to do a euro plate

[AudiSport12]

I got my whole kit shipped for $220. The core you're talking about is the same size as mine. Make sure you get the piping correct because it'll be a pain once you've pulled the bumper off and started cutting and find out your piping is wrong. Just follow that thread I posted and you will be fine. It tells you exactly how to do it.

Oh, and the 2.25">2" steel muffler reducer is seperate from the kit I ordered. All my piping is 2.25".

[AudiSport12]

Make your own Euro plate:

http://www.autoplates.com/catalog/cu...iew=europlates

[my 1.8t]

hay the tread did not work for the plate and front mount can you try to send it to my email at [email protected] thanks for all your help

[AudiSport12]

Weird it didn't work. Works for me.

For the intercooler thread search "custom intercooler" by me (audisport12).
For the Europlate, the web address is autoplates.com

[my 1.8t]

hay thanks alot and for the plate my bumper is a stock a4 bumper so should i do the plate holder or should i do just the mounting hardware

[AudiSport12]

I'm guessing the plate holder and the hardware. On my S4 bumper I just double-sided taped it because it already has the recession in the bumper.