Help @ Eurofest CT

**2001S4CT** · 05-05-2008 12:08 PM

I need help properly aligning my e-codes to the body. I tried so many bootleg ways but the right hand side is still messsed up. Maybe someone that will be attending can shine some light on me.

**Overboostin** · 05-05-2008 12:54 PM

does the corner move in and out a bit? I need help with that too.

**GramCracker** · 05-05-2008 01:22 PM

When are you going up to Eurofest, and do you want to drive up together?

**Das General** · 05-05-2008 02:18 PM

you shouldn't have to align anything if you have all 3 bolts in...

**2001S4CT** · 05-05-2008 03:03 PM

Originally Posted by deb38

you shouldn't have to align anything if you have all 3 bolts in...

Thats the thing I am missing the 3rd bolt in the back and I cant figure out how to get one in there nah mean

**2001S4CT** · 05-05-2008 03:04 PM

Originally Posted by grAh4m

When are you going up to Eurofest, and do you want to drive up together?

check your pm

**Overboostin** · 05-05-2008 08:33 PM

Originally Posted by 2001S4CT

Thats the thing I am missing the 3rd bolt in the back and I cant figure out how to get one in there nah mean

I'm in the same boat

**Das General** · 05-05-2008 08:49 PM

its a pain in the ass. I put my headlights in with the bumper off. but now that I have to take my headlights out every 2 days or so...i just leave the 3rd bolt undone.

**2001S4CT** · 05-05-2008 09:32 PM

Originally Posted by deb38

its a pain in the ass. I put my headlights in with the bumper off. but now that I have to take my headlights out every 2 days or so...i just leave the 3rd bolt undone.

and why do you take your headlights out every 2 days?

**Overboostin** · 05-05-2008 09:35 PM

Originally Posted by deb38

its a pain in the ass. I put my headlights in with the bumper off. but now that I have to take my headlights out every 2 days or so...i just leave the 3rd bolt undone.

If I leave the third bolt out, the headlight wobbles in and out a bit and the corner doesn't stay flush. Any idea why? besides the bolt not being in.

**2001S4CT** · 05-05-2008 09:40 PM

^^ well its because the the two tabs are flexible

**Das General** · 05-05-2008 09:44 PM

yup, you can tighten them down as tight as possible but without the lower one they will eventually move.

ive used only 2 bolts on each before and they sit alright, they dont wobble on the highway, but i have to make sure they are in there good. I sort wedge them in between the fender and the bumper

**Overboostin** · 05-07-2008 02:52 AM

When I was looking at the third bolt place, it looked like there was a big opening and I would need to put a bolt in with a nut underneath it and tighten it down enough so there would be no play in the hole. Am I looking in the wrong place?

**McKennaS4** · 05-07-2008 07:36 AM

most likely not.. mine is all chewed away somehow and ive been working on getting my headlights alligned for a few days (sparingly of course) id just try to grab a nut and washer to throw on the existing screw if u can fine one threaded correctly. if not pick up some bolts... ive been too lazy to do this yet but i think it's the route im going to have to go. are u guys all going to be at eurofest? ill be there.