Audizine - An Automotive Enthusiast Community

Results 1 to 8 of 8
  1. #1
    Deactivated Four Rings
    Join Date
    Nov 19 2006
    AZ Member #
    13499
    Location
    MMM

    HELP - can't find out where this connector goes!

    Guest-only advertisement. Register or Log In now!
    Trying to put my car back together after my valve bending fiasco and just need to do the radiator support and various small things. Cars been down for 3 weeks, I can't stand it anymore

    Its a green connector with a purple base, comes from the same wiring harness that has the AC condensor connection and the hood closing switch connection. It runs out of line right about to the second fan and is like a single pin type connector.

    I can't find where it plugs in, anyone know?

  2. #2
    Veteran Member Four Rings Ewok_Fetus's Avatar
    Join Date
    Mar 04 2007
    AZ Member #
    16134
    My Garage
    nothing
    Location
    nowhere

    Re: HELP - can't find out where this connector goes!

    A/C compressor
    ΜΟΛΩΝ ΛΑΒΕ

  3. #3
    Deactivated Four Rings
    Join Date
    Nov 19 2006
    AZ Member #
    13499
    Location
    MMM

    Re: HELP - can't find out where this connector goes!




    whereabouts? I couldn't locate a reference to this connection anywhere in the Bentley or online. My wiring behind the fan shroud is all kinds of dislocated. It seems like a giant PITA.

  4. #4
    Veteran Member Four Rings Mawhitey's Avatar
    Join Date
    Jan 20 2005
    AZ Member #
    4931
    My Garage
    99 AJL TQS
    Location
    UK

    Re: HELP - can't find out where this connector goes!

    Follow the wire from the AC compressor and this will connect to it .It clips to the front panel in a little white clip thing
    -Mark -

    .2008cc Stroker, K04064, ME7.5, Miltek, and other goodies
    My k04064 , ME3 DBC to ME7.5 DBW build thread

  5. #5
    Veteran Member Four Rings Stampy's Avatar
    Join Date
    Oct 02 2007
    AZ Member #
    21533
    My Garage
    A6, A8, X5, etc
    Location
    Windy City

    Re: HELP - can't find out where this connector goes!

    So its just like the one in this pic on the lower left right?

    Village Idiot!!!

    (\__/)
    (='.'=)
    (")_(")

    lots of rings in my garage

  6. #6
    Veteran Member Four Rings Mawhitey's Avatar
    Join Date
    Jan 20 2005
    AZ Member #
    4931
    My Garage
    99 AJL TQS
    Location
    UK

    Re: HELP - can't find out where this connector goes!

    yep, connects to that, then clips to the nice plastic front panel we have
    -Mark -

    .2008cc Stroker, K04064, ME7.5, Miltek, and other goodies
    My k04064 , ME3 DBC to ME7.5 DBW build thread

  7. #7
    Veteran Member Three Rings Bic-Ball's Avatar
    Join Date
    Mar 29 2007
    AZ Member #
    16844
    My Garage
    Is the street.
    Location
    Long Island, New York

    Re: HELP - can't find out where this connector goes!

    thats the one that you nearly rip apart when taking the radiator support off if you don't know any better :)

  8. #8
    Veteran Member Three Rings creechsa4's Avatar
    Join Date
    Jan 06 2005
    AZ Member #
    4747
    Location
    san diego

    Re: HELP - can't find out where this connector goes!

    compressor clutch 12+ feed. mine connected on the pass side right close to the compressor.
    82mm je pistons, scat rods, ported & polished aeb head. gt2871r, atp hi flow manifold (ported). 580cc injectors on custom giac tune. Once you boost, you'll never go back....

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.