ATP manifold wrench

[Condo]

I'm trying to get my ATP manifold off that I'm selling next week and there are 2 nuts that I can't get off. Does anyone have a modified wrench that they could loan me for a few days?

[A4 TSCHUSS]

It's really easy with a 1/4 drive swivel socket. I used a snap-on and it worked PERFECT and was a breeze.

[Condo]

It's really easy with a 1/4 drive swivel socket. I used a snap-on and it worked PERFECT and was a breeze.

Do you know of any stores that stock them?

[dougyfresh]

Like these, David?
http://www.sears.com/shc/s/p_10153_1...&sName=Sockets

[eg6siR]

thats exactly what he means doug

[Condo]

I found one like that on ebay for $17. I'm waiting to hear back about shipping.

[converted2audi]

I found one like that on ebay for $17. I'm waiting to hear back about shipping.

ha nice john.....let me know where you find it seeing as ill be needing one in the near future too

[Condo]

ha nice john.....let me know where you find it seeing as ill be needing one in the near future too

I'll only need it for about 10 minutes so I could ship it to you when I'm done with it.

[diagnosticator]

I found one like that on ebay for $17. I'm waiting to hear back about shipping.

Just go to Sears for a single flex socket in the required size, for < $10. (unless you want a set anyway)

[A4ringedONE8T]

You should be able to get it with a variety of regular wrenches. Ive done 5 or 6 Elim manifolds and my T3 ATP mani and never used a special wrench on any of them, I dont see the problem

[mike-2ptzero]

You should be able to get it with a variety of regular wrenches. Ive done 5 or 6 Elim manifolds and my T3 ATP mani and never used a special wrench on any of them, I dont see the problem

You must live in a magical world where angles dont exist, because people have had this problems since ATP started making manifolds which is well before the B6 was produced.

[A4ringedONE8T]

You must live in a magical world where angles dont exist, because people have had this problems since ATP started making manifolds which is well before the B6 was produced.

Ive read that plenty of times and Ive also installed plenty of these without any special tools ...

[audikid66]

the runners are larger therfore the bolts on top u dont have enuff room to get a wrench in.. same problem wit my atp mani

[A4ringedONE8T]

the runners are larger therfore the bolts on top u dont have enuff room to get a wrench in.. same problem wit my atp mani

Im well aware, Ive dealt with numerous ATP Elim mani's and my ATP T3 flanged manifold I have now, managed to make both fit with no special wrenches other than what can be bought from Craftsman

[CO AVANT]

I can get the atp and apr mani on/off with just craftsman flex head wrenches

I use 12mm nuts for the tight places and 13mm nuts for the easy to get to places...

[Condo]

I'll have to stop at Sears today and see what I can find.

[B6Lovin]

if you do get a special wrench i'll pay you for it if you wanna ship it to me with the manifold lol

it'll turn into the official AZ manifold wrench, we'll just ship it around to whoever needs it at the time

[Condo]

I picked up a 1/4 drive Craftsman swivel socket today and it didn't fit either. I'm going to take it back tomorrow and see if I can get a flex head wrench to fit.

[converted2audi]

I picked up a 1/4 drive Craftsman swivel socket today and it didn't fit either. I'm going to take it back tomorrow and see if I can get a flex head wrench to fit.

haha, let me know what you end up getting to work!