Looking For A Nut..

[UN-PIMP-Z-A4]

Im looking for some locking nuts to attach my turbo to my tp.
If any one can tell me the size and where i should go to source them I will sincerely appreciate it.

thanks in advance

[AudiA4_20T]

Im looking for some locking nuts to attach my turbo to my tp.
If any one can tell me the size and where i should go to source them I will sincerely appreciate it.

thanks in advance

M8x35 nut (says ETKA)

[k0mpresd]

m8x35 sounds like a stud/bolt description. m8 thread x 35mm long.

i could be wrong though. i cant think of how nuts are described in etka @ the moment.

[UN-PIMP-Z-A4]

Zoinks...
Thanks if either can confirm later I will be in your debt.

[manufan]

http://www.germanautoparts.com/hardware/Nuts/Nuts#5

[dualaudi]

Zoinks...
Thanks if either can confirm later I will be in your debt.

pretty sure the m8 is correct, as I had to get a few last month. use that cool red lok-tits

[UN-PIMP-Z-A4]

Thank you all Clint, Ian, manufan and dualaudi.
I appreciate it...

[aytheory]

add some nord-lock washer

[UN-PIMP-Z-A4]

add some nord-lock washer

can i find that at pep boys autozone or arch auto parts?
i just gonna order them throught the link provided above.

[prey]

The thread title almost sounded wrong, haha.. no homo.

I thought u wanted to nut bad lol.

[MikeWasHere05]

pretty sure the m8 is correct, as I had to get a few last month. use that cool red lok-tits

Blue is more than sufficient, unless you tighten like a girly man.

I snap bolts a lot . Its never tight enough for me I guess haha.

[dualaudi]

you're right, i meant the red bottle with the blue stuff inside...

[aytheory]

get them from here - fast reasonable shipping - and you can order small quantiles - but still quite pricey - but not as expensive as torsen washers

http://mdmetric.com/nordlock/bagrack.html

[aytheory]

you're right, i meant the red bottle with the blue stuff inside...

if you are talking about tread lock

it might not work since it is too hot around there

[djwimbo]

Blue is more than sufficient, .

somebody correct me if I'm wrong here, but IIRC the blue Loc-tite isn't designed to be used in that high of a heat application.

I'll double check in a min.

[airy52]

mikes a nut. lol.

[aytheory]

need red - but it just saids high heat

blue is good up to 300F which is nothing


http://www.loctiteproducts.com/produ...ID=10&SubID=48

[sean1.8t]

red really won't do anything either.

[MikeWasHere05]

Yeah I didn't consider the heat...

When I did mine I just put a dab of blue on it and tightened a whole lot by hand and its been fine since. Which is why I figured blue

[sean1.8t]

^blue is the weakest. it melted/vaporized less than 5 minutes after you turned on your car

[AudiA4_20T]

ok kidding m8x35 was the wrong number, the nut isnt listed

[UN-PIMP-Z-A4]

better stop playing