AGN valve cover

[joe.audi]

is anybody runnin this valve cover i know allot of the vw guys are but it is a nice clean look. the only thing is the holes ware the coil packs would go need to be ported out a little bigger cause this is the european spec made for plugwires

[windyctyaudi]

what are the advantages of running a different valve cover??

[dougyfresh]

Talk to Winston. I think he's fitting the AGN valve cover onto his AMB motor.

[Four Play]

Pretty worthless if you have CP's that bolt down. Looks pretty damn clean though!

[joe.audi]

Pretty worthless if you have CP's that bolt down. Looks pretty damn clean though!

well why run bolt down coilpacks yeah def verry clean and that would be the reason for using it

[Four Play]

well why run bolt down coilpacks yeah def verry clean and that would be the reason for using it

I run the E packs that bolt down, I blew the factory ones that don't a long time ago

That valve cover would look sick with some powdercoating

[audipotential]

Meh I'll stick with my painted valve cover

[jrau13]

Im running the "E" coils as well but this would look pretty slick though.

[[email protected]]

You can send the cover out to a machine shop to enlarge the coilpack openings and cut the notches or you can do it yourself.

Took a grinder and sander to the inside of the openings and got a nice fit. Then took a dremel and cut a slot open at a 45deg angle so I don't have to cut the tab off the coilpack.

I don't have any pics of the cover as it is on the car at the shop.

Some of the VW guys have modified the cover to take bolt down coilpacks. You would have to search Vortex to get that information.

[manhertm]

Looks like the same valve we already have, just looks cleaner without the coilpacks installed. Not worth the money especially since it doesnt fit. Just polish your existing cover for a clean look. IMO