Techtonics Full Exhausts!! **Performance-Cafe.com**

[PerfCafe]

Techtonics 2.5" Full Exhausts Featuring Borla Mufflers are IN! The one and only, in stock and ready to ship. Get yours with DTM or JTM Tips and a Turbo Downpipe to maximize your power! All of the B6 Exhausts from Techtonics are Stainless Steel to prevent rust and minimize wear. Order yours with Dual DTM/JTM tips for a Quad Tip Exhaust Setup!

Check it out!! --->> HERE!!

We also have Techtonics Downpipes and Tips.

[Noodle]

Nice price, good product too.

Why post this when I'm trying to save my money? Why why why..

[PerfCafe]

well thats why! We want you guys to keep on

Nice price, good product too.

Why post this when I'm trying to save my money? Why why why..

[PerfCafe]

Hooray for a great sounding exhaust & dyno tuned power!

[AudiA4_20T]

that doesn't come with the downpipe?

[PerfCafe]

Correct, downpipe is extra but makes a huge difference with HP in turbo cars. Downpipes are available for manual and automatic cars just let us know!

[mattman]

sound clips?

[tuned A4]

i have had this exhaust on my car for a while now. we had to do a little custom work to make it fit but its all good. i am fcking pissed that i payed a lot more than that! thats a good price!

[hakim0409]

nice!! but i wonder if they make one for a fwd b6 auto trns ?? and how much that would cost?

[PerfCafe]

nice!! but i wonder if they make one for a fwd b6 auto trns ?? and how much that would cost?

Got your PM, Im calling Jeff tomorrow to see what is available.


- Jb

[PerfCafe]

sound clips?

Nope sorry working on getting some sound clips! These do sound nasty though, perfect amount of subtle deep rumble and beautiful throaty exhaust tones!

Here are some sounds from an S4 exhaust:

http://www.youtube.com/watch?v=knslbkWuoP4

http://www.youtube.com/watch?v=muLiPJbl0D0

[b6onboost]

^ yeah, but a 2.7T is going to sound a lot nicer than a 1.8T. Some clips on the 1.8T would be really helpful.

[PRVWing]

I had a Techtonics exhaust and downpipe on my MkIV Jetta and it was awesome!! great product!! sounded great also!!

[EUROaleksey]

my custom catless downpipe straight 3" exhaust should be in in couple weeks... I'll definitely take some clips..... and I'm paying 600 for it!!! if it works for me - I'll be encouraging everyone to go custom..... just wait 15 days :)

[doublezero30]

what? thats not a catback system?? and its over $800??? ill pass. although a kid i know has it on his b5 1.8t and it sounds soo good!

[PerfCafe]

what? thats not a catback system?? and its over $800??? ill pass. although a kid i know has it on his b5 1.8t and it sounds soo good!

Well you do get what you pay for, Stainless Stell, Dyno Tuned, and it is a cat back system, purchase the downpipe for the full turbo back system!

... and yes they do sound saweeet!

[Groove1797]

it's 800 for a downpipe back system and 800 + for a catback system

[PerfCafe]

$241 for a downpipe ... genuine bang for buck as it gives great gains!

[PerfCafe]

I wonder if people would be interested in doing a techtonics group buy?

[eddier]

if you get that DP down to 200 i'd be hard pressed not to buy one.

[A4Avant02]

Group Buy sounds good....

I would want a downpipe and set up for my '02 Avant 1.8 with tip.....

[eg6siR]

$241 for a downpipe ... genuine bang for buck as it gives great gains!

holy fuck, $250 for a tube with a piece of flex pipe? i can build that for like 30 bucks

[grimlock]

if you get that DP down to 200 i'd be hard pressed not to buy one.

x2

[AudiA4Turbo22]

I Agree That Borla Makes A Good Product, But For $800 I Can Get A Mandrel Bent All Stainless Magnaflow Set Up, And The Pipes Are Actually Polished And Don't Look Like A Used Rusted Exhaust, And It Comes With A Dp, No Offense To Seller, Just Stating Opinion!

[PerfCafe]

I Agree That Borla Makes A Good Product, But For $800 I Can Get A Mandrel Bent All Stainless Magnaflow Set Up, And The Pipes Are Actually Polished And Don't Look Like A Used Rusted Exhaust, And It Comes With A Dp, No Offense To Seller, Just Stating Opinion!

No offence taken. Difference is dyno tuning, if you want to squeze every bit of power out it will take an awful lot more than $800 in build + tuning to get these results. And to top it off you will probably end up with exactly what Techtonics already has available.

What I am wondering is where you see a used rusted exhaust? All of Techtonics Exhausts for the B6/B7 are Stainless Steel which cant rust and are as shiny as ... well stainless steel ... unless you are going for a polished chrome look ... but if your really concerned with dipping and chrome plating your exhaust you might as well dip it in nickel and be true baller. But if you are trying to save money then that would probably not be the way to go.

[PerfCafe]

holy fuck, $250 for a tube with a piece of flex pipe? i can build that for like 30 bucks

Then I invite you to manufacture downpipes ... we'll sell them for you and together we'll corner the market on downpipes!

[AudiA4Turbo22]

^^HAHA!!! ya no i have a custom set up but since most available exhausts for our cars are polished, i was wondering as to why this one wasn't! i know Borla makes a good product, it was just a simple why didn't they finish it, instead of leaving it look butch!

[mattman]

Well you do get what you pay for, Stainless Stell, Dyno Tuned, and it is a cat back system, purchase the downpipe for the full turbo back system!

... and yes they do sound saweeet!

what is this "dyno tuned" you speak of?
any info backing that up? i'm not callin BS i would just like to see some numbers or any of the R&D that went into this.

[mattman]

[QUOTE=PerfCafe;2490172]Nope sorry working on getting some sound clips! These do sound nasty though, perfect amount of subtle deep rumble and beautiful throaty exhaust tones!
[QUOTE]

no sound clips = fail

[PerfCafe]

^^HAHA!!! ya no i have a custom set up but since most available exhausts for our cars are polished, i was wondering as to why this one wasn't! i know Borla makes a good product, it was just a simple why didn't they finish it, instead of leaving it look butch!

Well Borla as well as Techtonics are pretty much for race application only... it doesn't make sense to dip and chrome plate an exhaust for race applications. For show is a different purpose but then your catering to a different crowd ... We feel that Stainless steel is a very happy medium between build quality, as well as practicality on the street, track, and show.

[PerfCafe]

what is this "dyno tuned" you speak of?
any info backing that up? i'm not callin BS i would just like to see some numbers or any of the R&D that went into this.

PM sent.

[mattman]

PM sent.

none recieved....

Edit: nevermind...
thank you

[junkie1.8TQ]

how does this compare to the AWE tuning? I heard that AWE has the best performance exhaust out there.

[PerfCafe]

how does this compare to the AWE tuning? I heard that AWE has the best performance exhaust out there.

It is all Apples and Oranges, both run 2.5" setups, both offer exhausts with downpipe/cat back options, and both fabricated from top parts, made of stainless steel, etc. I do know that Techtonics actually dyno tunes all their exhausts for maximum performance, their R&D into their products amazes me. I have heard both exhausts and prefer techtonics, we all run and love techtonics, the sound, performance gains will win me over every time!

We are working on getting a sound clip for the B6 & B7, once we have them rest assured, you guys will have them as well!

[junkie1.8TQ]

^^^

thanks... Sound clip would be awesome.

[FromS60toB61.8t]

i still think AWE is one of the best options if not the best... Turbo back awe is just amazing...

[junkie1.8TQ]

yea i was thinking about the AWE also I heard good things about TT products too..., just wanted to do my research before going out and purchasing something like that.

[PerfCafe]

yea i was thinking about the AWE also I heard good things about TT products too..., just wanted to do my research before going out and purchasing something like that.

As do we all sir.

[junkie1.8TQ]

any date on the sound clip... has anyone purchased one of these yet for their b6?

[PerfCafe]

any date on the sound clip... has anyone purchased one of these yet for their b6?

Were working on sound and video clips for these ... it is a slow process ... rest assured they will come!