offset question...

[SGVA4]

Im bout to hop on a set of Sparco D Spec II..

the specs are:

19x8.5 35et and 19x9.5 22et

Will I rub in the rear with Eibach/Bilstein set up? tks in advance guys!

[Zebman]

The rear is going to poke big time. It will probably sit a fair amount outside of the fender.

[Phrost]

Front should fit fine, and the rear looks like it's going to poke. I'm not even sure how much, but it shouldn't be that bad... maybe 1/4 inch or something? You'd have to ask someone else who is running 9.5" in the rear what their offset is, and where the wheel sits exactly. But it definitely will not rub any of your suspension components.

[SGVA4]

tks fellas..

im going for a very aggresive stance....but I had my doubts about +22 in the rear....

[Underpsi]

9.5" rear should be around ET42; you will be out the fender about 20mm. It won't work.

[Capt. Obvious]

The rears won't fit. My old 9.5's were et32 and I had to run pretty aggressive camber to get them to fit into the fenderwells and not rub (as much), and I had to stretch my tires on top of that.