timing belt broke what to fix?

[Welch1082]

I know i need a new head and the timing belt kit, but what else should i replace just to take it back to stock. I am tring to make a list of things that i am going to need to order in the next 2 weeks or so, to get her back working. Its only been a day and i already miss her.

[Eurotuned_A4]

have you gotten into it to see all the damage? back when my tensioner took a shit on me almost 4 years ago i had to replace 8 valves

[A4_2.8tuner]

have you gotten into it to see all the damage? back when my tensioner took a shit on me almost 4 years ago i had to replace 8 valves

same thing happened to me, 5 valves had to be replaced. that will more than likely be the outcome in your case as well. best of luck

[ILoveT]

Expect the worst and hope for the best. Maybe you will get lucky and it won't be to much of an extensive project.

[pfa65]

was the car moving while it broke? My buddy had his water pump fail on the highway... took all 30 valves in the v6 out. My belt stripped as I was turning the car on, and it only bent one valve in my v6.

That can make a big difference. I am not an expert, but depending on how many valves are bent, the head may not need to be replaced.

Someone correct me if I am wrong. Good luck because I know how shitty it can feel.

[Welch1082]

Well i was in going in to 3rd so i was moving, I had it towed to the closed audi shop and i think it was all of them.

[quattro16]

Just rebuild the whole head. Get whole new gasket kit, head bolts, t-belt kit, coolant flange.