Original B7 RS4 wheels on B6?

[A4monkey]

So i've been doing a lot of searching, and although there is plenty of B6's out there with RS4 replicas, i haven't been able to find out with the original Rs4 wheels.

my question is will the original RS4 wheels fit a B6 with out rubbing or sticking out?

the specs on the RS4's if i'm not mistaken is 19x9 wheel size or maybe even 19x9.5 and tire size is 255x35x19 with a 35mm offset. There's a guy in GA who's selling his original Rs4 wheels with rubber for $1100, pretty damn good deal, so im wondering if it'll fit since the tire is so wide and the wheel a lot wider too

thanks in advance

[Onese1f]

Fwiw, you can pick up a pair of brand new ones from Velocity for 1200.

[A4monkey]

i can pick up a set of RS4 wheels alone on this forum for $900 if I'm lucky, but like i said, its $1100 and Tires are included. And tires are not cheap. 255x35x19 have got to be at least $200 a tire for a good brand.

So what do you think? it should fit right?

[EBG 18T]

IIRC the real B7 RS4's are 19x9's but are a 23-28mm offset (or somewhere around there). They aren't going to fit under standard fenders.

[F16HTON]

So i've been doing a lot of searching, and although there is plenty of B6's out there with RS4 replicas, i haven't been able to find out with the original Rs4 wheels.

my question is will the original RS4 wheels fit a B6 with out rubbing or sticking out?

the specs on the RS4's if i'm not mistaken is 19x9 wheel size or maybe even 19x9.5 and tire size is 255x35x19 with a 35mm offset. There's a guy in GA who's selling his original Rs4 wheels with rubber for $1100, pretty damn good deal, so im wondering if it'll fit since the tire is so wide and the wheel a lot wider too

thanks in advance

I have sold several sets in the past (no longer selling them) and the offset is honestly 6mm to agressive, they are ET29 and should be ET35.

The tires do not stick out but they are fully flush with the fenders on 235s, you can get away with it with 225s up front though. The rear is fine though. OEM RS4 wheels do accomodate the biggest of big brakes.

The part number is 8E0 601 025 AG 1H7 if anybody needs it.

[A4monkey]

bummer :/ ....thanks for the info though. Back to looking for Replicas

I just found a thread where they put original Rs4's on B7 A4, with a 245x35x19 tire and totally rolled fenders it fit. Looks real good too

400HPA4: ^^235 tire on a 19x9 wheel...isn't that pushing it? seeing pics of the 245 on that wheel looks stretched enough. I think i'll just stick to looking for Replicas haha

[F16HTON]

bummer :/ ....thanks for the info though. Back to looking for Replicas

I just found a thread where they put original Rs4's on B7 A4, with a 245x35x19 tire and totally rolled fenders it fit. Looks real good too

400HPA4: ^^235 tire on a 19x9 wheel...isn't that pushing it? seeing pics of the 245 on that wheel looks stretched enough. I think i'll just stick to looking for Replicas haha

I ran 235-35-19 on 9.5s and it looked and performed great.

You can see how it looks in this photo (rear wheels)

[bwoy1981]

bummer :/ ....thanks for the info though. Back to looking for Replicas

I just found a thread where they put original Rs4's on B7 A4, with a 245x35x19 tire and totally rolled fenders it fit. Looks real good too

400HPA4: ^^235 tire on a 19x9 wheel...isn't that pushing it? seeing pics of the 245 on that wheel looks stretched enough. I think i'll just stick to looking for Replicas haha

Hey, I looked for that thread and couldn't find it. Can you show me the link to the original RS4'son the B7, Im interested in finding out this also..

[F16HTON]

http://www.audizine.com/forum/showth...&highlight=RS4

[vinny.dtw]

There is someone running oem rs4 wheels on a b7 s4. Dropped, but needed to roll fenders. I think its doable, but requires prob more work then its worth considering velocity motoring wheels look just as good, but prob not as durable.

[F16HTON]

There is someone running oem rs4 wheels on a b7 s4. Dropped, but needed to roll fenders. I think its doable, but requires prob more work then its worth considering velocity motoring wheels look just as good, but prob not as durable.

Yes, I just posted the link

[audimymind]

I ran 235-35-19 on 9.5s and it looked and performed great.

You can see how it looks in this photo (rear wheels)

LOOKS FUN MAN THANKS AGAIN FOR THE INFO

[bwoy1981]

I rub a bit with a full tank in the inner rear fender with et38 9.5 in the rear but im SLAMMED on coils so I dunno, i might be able to pull it off when i raise the rear a lil. Plus i never have more than 2 people in my car! lol

[audi314]

I only rub if I am going over a dip in the road unevenly. And its a tiny rub at that. I have 19x9.5 ET35, BUT I am not slammed like bwoy1981 is. I am also running 245/35's in the rear.

[A4monkey]

Audimymind --> yeah it looks real nice, however what is the offset on the wheel you're running ? Because the whole thing is that the RS4 has an offset ET29 which makes everythign screwy.

[A4monkey]

Sorry took me so long to respond, was busy these few days. Heres the link to the B7 with the Original RS4 wheels. Like i said before, he says he had to roll fenders to the max, and squeeze on a smaller tire size just to make it fit...Enjoy

http://audizine.com/forum/showthread.php?t=90692

[A4p]

I have the RS4 Wheels with 235 /40-18 Michelin tires, running with S-line suspension. and it loooks so damn sexy

[bwoy1981]

^^^^^^^^^ pics please!!!!!!!!

[yung turbo]

I have the RS4 Wheels with 235 /40-18 Michelin tires, running with S-line suspension. and it loooks so damn sexy

doesnt the oem rs4 come in 19.

[EBG 18T]

I have the RS4 Wheels with 235 /40-18 Michelin tires, running with S-line suspension. and it loooks so damn sexy

OEM B7 RS4's did not come in a 18". They were 19" only, so i highly doubt you are running the wheel in question. You must have a replica..

[A4p]

Just one cam picture. Can you tell me if this is the OG or replica, whats the differince??

[vinny.dtw]

Those look like Hartmann RS4 replica wheels. Got any other pics, that would help a lot more.

[EBG 18T]

Just one cam picture. Can you tell me if this is the OG or replica, whats the differince??

If they are 18's they are reps and their is nothing wrong with that. I have a set of 18" Velocity RS4 Reps for my winter beaters.

[A4monkey]

yeah Replicas FTW!! lol I need some 19" RS4 reps. Also looking for a good deal on the Stasis street sport suspension.

^^^those Rs4 wheels you've got look nice, definitely replicas though. Although i can't deny that IMO 19's look better on the B6. Gives it a fuller look.

[F16HTON]

OEM B7 RS4's did not come in a 18". They were 19" only, so i highly doubt you are running the wheel in question. You must have a replica..

Actually they do come in both 18" and 19" (8.5 x 18 et 24)