anyone know how to contact Garrett Lim?

[Maverick]

I need to reach Garrett Lim for a special request, he is the owner of GIAC I believe. anyone has a way to reach him? I emailed him but no response.
the phone number i searched is disconnected.

thanks guys

[A4Shizl]

Hit up Jeff... or Jeff Moss

Jeff can be reached at Audi geeks...

[EBG 18T]

call Jeff Moss @ Torque factory. He can get you what every you think you need from Garrett. Link to Torque factory - Moss's company

[AudiA4_20T]

Im liking this thread

[B6Lovin]

ditto. someone wanna hook me up with a number for someone high up in revo? ive got a few things i'd like to ask


although i get the feeling someone will tell me just to give eurocode a call... lol

[Maverick]

thanks guys, i will give Jeff a call tomorrow

[skeeball]

I'm guessing that will be an enlightening conversation if you do get a hold of Garrett. Hopefully he dishes the dirt. PM with what you find out.

[02silverb6]

Maxx what are you up to this time..?

[Maverick]

I'm guessing that will be an enlightening conversation if you do get a hold of Garrett. Hopefully he dishes the dirt. PM with what you find out.

i will pm you. I am hoping that it will turn out the way i wish for.

[Maverick]

Maxx what are you up to this time..?

lol, you will know soon.

[dummptyhummpty]

Hey,

Yeah call Jeff, great guy (installed my s/c). If you reach Garrett, can you let me know, I might want to talk to him. Also Skeeball, did you get my last PM?

[F16HTON]

FWIW Garrett is a family practice physician and has an office in Irvine

[Maverick]

Hey,

Yeah call Jeff, great guy (installed my s/c). If you reach Garrett, can you let me know, I might want to talk to him. Also Skeeball, did you get my last PM?

lol, i was thinking about you when they mentioned Jeff Moss

[Maverick]

damn, there is no way I can reach Mr.Garrett Lim. I called Jeff and I called Austin@GIAC but no luck.
now I am just trying to locate a file.

[A4TUNE]

make an appointment for a physical at his office.

[02silverb6]

make an appointment for a physical at his office.

LMAO! Maxx come on now..what is up with you and Steve and everyone else for that matter keeping secrets? LOL

[Ill 3.0]

seriously, let me know what's up too.

[QuattroRocket]

If Garrett is as elusive as usual, I dont think the man sleeps ever, then talk with Andrew at GIAC he should be able to help you out.

[Maverick]

make an appointment for a physical at his office.

lol, i don't feel like going to Irvine CA.

[Maverick]

LMAO! Maxx come on now..what is up with you and Steve and everyone else for that matter keeping secrets? LOL

seriously, let me know what's up too.

I bought the hardwareS(you guys know what I am talking about). Now I am trying to locate a file that was made from GIAC so I won't blow up my engine without forged pistons. I have to no choice but to do forged pistons, i will rock this game as high as I can go.

If Garrett is as elusive as usual, I dont think the man sleeps ever, then talk with Andrew at GIAC he should be able to help you out.

lol, Garrett is elusive for sure from the people that I called who know him. I talked with Austin but he said they don't have that file anymore.

I am waiting for a phone call tomorrow.

[skeeball]

Get the meth injection.

[Ill 3.0]

I bought the hardwareS(you guys know what I am talking about).

Ok, didn't think you bought it yet. Yeah software is more important. You can still obviously throw rods, melt pistons etc. with forged internals with crappy tune. You shouldn't need forged internals at all with this kit unless you go higher boost than current set up. And yes, I think Dave's w/m suggestion is a great idea. Early summer and I'll have money for better software and w/m (I hope).

[Craigo]

Ok, didn't think you bought it yet. Yeah software is more important. You can still obviously throw rods, melt pistons etc. with forged internals with crappy tune. You shouldn't need forged internals at all with this kit unless you go higher boost than current set up. And yes, I think Dave's w/m suggestion is a great idea. Early summer and I'll have money for better software and w/m (I hope).

water/meth really isn't the greatest thing for cast pistons to endure

[Ill 3.0]

water/meth really isn't the greatest thing for cast pistons to endure

really? why is that?

[Craigo]

really? why is that?

puts more stress on a metal that is very weak to begin with

[skeeball]

How is it that lower temps put more stress on the metal than detonation? I wasn't suggesting advancing timing with the w/m.

[Maverick]

Ok, didn't think you bought it yet. Yeah software is more important. You can still obviously throw rods, melt pistons etc. with forged internals with crappy tune. You shouldn't need forged internals at all with this kit unless you go higher boost than current set up. And yes, I think Dave's w/m suggestion is a great idea. Early summer and I'll have money for better software and w/m (I hope).

Tyler, what software are you running at this point? I am searching for answers at this point.

[skeeball]

FWIW, I've been running shit tune for a year and half.

[Maverick]

How is it that lower temps put more stress on the metal than detonation? I wasn't suggesting advancing timing with the w/m.

YGPM

[Ill 3.0]

The software I'm using is a little unknown. I am using a 3 bar fpr and should be PES software. However I also know that the GIAC software used 3 bar fpr so it is possible I got GIAC software or something very close. I don't know anyone with the same setup as me with a vag to compare logs with. I think that is the only way for me to find out. Once the Hawse (sp?) pipes become available I'll install an A/F gauge and wideband sensor to see how it does under boost.

[Maverick]

The software I'm using is a little unknown. I am using a 3 bar fpr and should be PES software. However I also know that the GIAC software used 3 bar fpr so it is possible I got GIAC software or something very close. I don't know anyone with the same setup as me with a vag to compare logs with. I think that is the only way for me to find out. Once the Hawse (sp?) pipes become available I'll install an A/F gauge and wideband sensor to see how it does under boost.

YGPM as well

[dummptyhummpty]

lol, i was thinking about you when they mentioned Jeff Moss

Yeah. Dude you didn't buy my S/C? BTW I've got something interesting going on, I'll let you guys know if it works out well for me.