Wheel Center Cap Question - Flik Artics

[Dlay]

Hey I searched the forum for this but couldn't find an answer, does anyone who is running Flik Artics on there A4 know the size of the center caps because I wanted to replace it with Audi ring caps because I have seen a few people do that on here, if you have already done this could you please tell me where you got them from. Thanks

I have 18" Flik Artics btw, but I doubt that will make a difference.

- Derrek

[iwearpro]

use these.This is what I had.
http://www.ecstuning.com/stage/edpd/...&engine=V6+30v

[upstateavant]

I have gunmetal gray Flik Wasps. I followed a DIY on here that uses one of the B6 17" OEM center caps and your Flik center caps. Basically you cut the clips off the back of the OEM and then grind down the outer edge of the Flik cap and then plastic-weld the the Flik cap inside the OEM cap. I worked perfectly and took less than two hours with a belt sander. The OEM caps I got almost match the gunmetal gray perfectly and they have the chromeish rings on them to match the lip. I'm not sure what caps I bought, I just brought one of the Flik caps to the dealer and found one with the same diameter.

[endlesswinterco]

u can that ^, or you can go on ebay, and do a search for audi center caps. i found a guy in the UK that for a total of 23$ i was able to get black center caps stickers, that go over top the flik center caps and look great. i will take a pic and size and post it up.

[Dlay]

u can that ^, or you can go on ebay, and do a search for audi center caps. i found a guy in the UK that for a total of 23$ i was able to get black center caps stickers, that go over top the flik center caps and look great. i will take a pic and size and post it up.

Do you think you can also give me the sellers user name or post a link to a sale like that one. Also pictures would be great Thanks.