Who has the most Hp on here and how?

[cmckelvy]

Is anyone on here in the 400 hp range with an A4? I have added up how much it is going to cost to get the stage 3+ purchased/installed and I convinced myself to go ahead and go bigger...install new internals...everything. I would like to know who is rockin the most HP and what setups you have.

Thanks,

CM

[pizdetsauduxa]

drop in a vtec son

[|FYASKO|]

me. just added 14 more stickers so my HP builds up.


just messin...

[AudiA4_20T]

there are a few builds that are going to put down some big power but what are your HP goals?

[F16HTON]

Is anyone on here in the 400 hp range with an A4? I have added up how much it is going to cost to get the stage 3+ purchased/installed and I convinced myself to go ahead and go bigger...install new internals...everything. I would like to know who is rockin the most HP and what setups you have.

Feel free to PM me or hit me up on AIM (gsfowler) if you have any questions

[dirtybrd]

I'd say Greg, I know he has a 350awhp dyno slip, but there a quite a few potentially 400+awhp cars in the works, just no dyno slips to prove it...yet!

[RLB6]

He does? Only one I've seen is the 323 AWHP dyno. I did I miss out on him posting that?? Let me search.....

I'd say Greg, I know he has a 350awhp dyno slip

[cmckelvy]

Thanks!!!

[dougyfresh]

Check out the B5 forum. Lots of stuff going on there too.

Since you never specified model (b5, b6, etc..). Mike Hood has broken 400awhp!

[F16HTON]

I highly doubt I make the most power with a B6, I know the most powerful, smoothest driving and most pure setup I have driven belongs to Pierre Kaufer (RockNRims).

He has a fully built 2.0L motor from Eurocode with Cosworth doing all of the machine work/balancing. The hardware is APR Stage III++ and it makes about 400WHP and 400WTQ.

This is an entire custom setup that David was able to pull off.

[OneBadAudi]

Horsepower sells cars, torque wins races. From the mouth of Carroll shelby himself

[cmckelvy]

the car is a 2004 a4 quattro automatic.

[SinisterA4]

The auto might hold you back a little. I don't know if there are too many upgrades to the Tip yet...

[akaEsCo01]

The auto might hold you back a little. I don't know if there are too many upgrades to the Tip yet...

That's a huge undertsatement. I only know of one high hp BT tip and I don't remember who's it is. It's DG and from So Cal if I can recall right

[jon102034050]

you could always go with level 10 but i think youre best off just trading it in and getting one in manual.

[martini]

I highly doubt I make the most power with a B6, I know the most powerful, smoothest driving and most pure setup I have driven belongs to Pierre Kaufer (RockNRims).

He has a fully built 2.0L motor from Eurocode with Cosworth doing all of the machine work/balancing. The hardware is APR Stage III++ and it makes about 400WHP and 400WTQ.

This is an entire custom setup that David was able to pull off.

what software?
and whats the second + for

[actlsub9]

and whats the second + for

GT2871R

[F16HTON]

what software?
and whats the second + for

APR, 71R

[cmckelvy]

Why does the tip hold me back so much? This is just Awful news.

[Maverick]

TIP tranny has limitations but so does clutch. most people here love rowing the gears and they hate auto.
Mike Hood is number 1 he puts down 600+awhp. Greg is number 2 and he posted here, talk to him.

[Maverick]

btw, you can do what clint is doing, B52.8 tranny swap if you want a manual now.

[KNGRNGS]

right now i have 320 whp, hoping for atleast 400whp after the next tune!

What are you looking to do / spend?

[A4ringedONE8T]

right now i have 320 whp, hoping for atleast 400whp after the next tune!

What are you looking to do / spend?

Dyno sheet?

[sean1.8t]

APR, 71R

ok, it's annoying when people try to brag about numbers and such but don't ever let out all the info .. yeah, cool eurocode built it. way to go..

but by what you have posted, this guy has a 71r[eliminator] turbo bolted to an APR manifold, on a 2.0L motor and had 400fwhp/400fwtq..

so which of that is right? or wrong?

just post all the info, or none. it's not that hard.. how are any of us going to learn. and know what's out there to purchase

[A4ringedONE8T]

ok, it's annoying when people try to brag about numbers and such but don't ever let out all the info .. yeah, cool eurocode built it. way to go..

but by what you have posted, this guy has a 71r[eliminator] turbo bolted to an APR manifold, on a 2.0L motor and had 400fwhp/400fwtq..

so which of that is right? or wrong?

just post all the info, or none. it's not that hard.. how are any of us going to learn. and know what's out there to purchase

It is a E-Code built 2.0l, unsure of the head, running a T25 GT2871R with the rest of the APR 3+ kit and a custom written APR file! Also an AWD car and I dont believe its a documented 400/400, just believed to be in the ballpark

[dirtybrd]

That car was built sometime ago IIRC, and it's a 71r not 71r elim.

[Groove1797]

APR, 71R

They raised the redline too, right?

[A4ringedONE8T]

They raised the redline too, right?

I believe it has a built head as well but dont remember any particulars. If that is the case, Im sure its reving to at least 8k

[9744RR]

the car is a 2004 a4 quattro automatic.

You'll never make 400 to the wheels with a tip.

[sean1.8t]

You'll never make 400 to the wheels with a tip.

well with that attitude he won't..

some of the fastest versions of cars are automatics. like supra's for one.. a tip could put out big power. someone just needs the balls to go all out

[CO AVANT]

It is a E-Code built 2.0l, unsure of the head, running a T25 GT2871R with the rest of the APR 3+ kit and a custom written APR file! Also an AWD car and I dont believe its a documented 400/400, just believed to be in the ballpark

I wonder if I can get my hands on that custom file seeing as I now have almost the exact same setup as Rocknrims... Not sure if his head is fully build with cams like mine though. BTW, my engine if FINALLY done and being shipped back to me. Nice $4K + rebuild bill...

[dirtybrd]

Get that bitch running.

[Don Supreme]

I wonder if I can get my hands on that custom file seeing as I now have almost the exact same setup as Rocknrims... Not sure if his head is fully build with cams like mine though. BTW, my engine if FINALLY done and being shipped back to me. Nice $4K + rebuild bill...

ouch!

[dougyfresh]

I wonder if I can get my hands on that custom file seeing as I now have almost the exact same setup as Rocknrims... Not sure if his head is fully build with cams like mine though. BTW, my engine if FINALLY done and being shipped back to me. Nice $4K + rebuild bill...

Damn. Too bad I didn't know this back in November...

Haha. Either way. You're car is set up good now! Good to hear the engine is done. That's one step closer to mine for Bob!

[dirtybrd]

Jordan, was Bob able to confirm the cams being the issue with your timing code?

[CO AVANT]

He said he went over the cams for hours and came to the conclusion that they were maybe a tad off with correlation of the press on ring in the rear. He told me he warrantied them with new cams with the pin to secure the ring. I also now have a new cam tensioner solenoid since my last one was slightly bent during shipping before my last build. Guess we'll see if I ever get that code again. Also will really never know which one caused it. New crank trigger wheel was also replaced during this rebuild. I was thinking this rebuild (engine part only) would cost me ~$2500. Didn't think it would touch $4500 with the new cam tensioner solenoid (reassembly labor was a bit more than I would think, but I did get a $250 discount for it taking so long)...

[dirtybrd]

Ouch! I'm on my way over with a six pack and we'll get that bitch in there.

[CO AVANT]

ha lol, already drinking beer after hearing that news today... I'll have it in and running within a day of receiving it. Can't wait till this bitch runs again...

[dirtybrd]

It's gonna be sweet with the APR stuff on there.

[9744RR]

well with that attitude he won't..

some of the fastest versions of cars are automatics. like supra's for one.. a tip could put out big power. someone just needs the balls to go all out

A good imagination can go a long way. The reality is no one with the B6 tip has made 400whp and no one on the B6 boards has gone any further with a tip than maybe a VB or TC upgrade. If anyone has made 400whp with a tip, I would love to see it. The car in my sig is a tip and I wouldn't waste my money trying to get 400whp out of it.