18x8"/18x10" Porsche Turbo Twists W/ Adapters!

[B5.5_SEDAN]

Just thinking about going to 19's and wondered if anybody might be intersted in my Turbo Twists they are as follows

*These Are Italian Reps and the original offset before spacers is +50mm front and +65mm rear, I have 20mm adapters in front and 25mm in back.

Front: 18x8" W/Adapter = +30mm offset 225/40/18 Tires

Rear: 18x10" W/Adapter = +40mm offset 255/35/18 Tires

Tires are Nankang NS-II's / wheels and tires only have maybe 1500 miles on them so they appear new. There is not a scratch or anything on these wheels they are perfect, I clean them about every other day. They will fit lowered because mine is dropped decently and they rarely ever rub except in the front before I rolled my fenders. My rears rubbed a tad bit on a road trip with 4 people in the car. The adapters will bolt to the hub using your OEM wheel bolts and it comes with spline drive lug nuts.

Asking price is $1,300.00 shipped to your door. I am in no way hurting to sell these so the price is firm, I bought everything brand new and it will cost you more than that if you buy it all new so I think my price is fair. Here are the pics:

[B5.5_SEDAN]

These should fit B5/B6 A4's perfect and probably C5 A6's too.

[Das General]

There is no way you are gonna fit 10" wheel on a b5 car.

[Frankvr6]

Here are two examples of 18X10 on B5 & B6





18X10 on B6

[Frankvr6]

By the way $1300.00 for everything? That's a steal.....
Good luck with the sale.

[B5.5_SEDAN]

There is no way you are gonna fit 10" wheel on a b5 car.

Sorry, but you obviously don't know your VW's/Audi's or your wheels very well do you?

[B5.5_SEDAN]

Will trade for 19" B7 RS4 reps also.

[quattro2003]

interested. i was curious tho... with a wider wheels in the rear, would that hard the diff on a quattro car? i'm not trying to act like i know, i just don't want to damage anything.

[Electric97]

No but it will make your car handle worse...

But Form>>>>Function right?

[B5.5_SEDAN]

interested. i was curious tho... with a wider wheels in the rear, would that hard the diff on a quattro car? i'm not trying to act like i know, i just don't want to damage anything.

The rolling diameter on the 2 different sizes are exactly the same as OEM so they will work on a Quattro car with no problems.

[B5.5_SEDAN]

No but it will make your car handle worse...

But Form>>>>Function right?

You are kind of right in some aspects, on a AWD car it will probably make it push a little more in the corners however wider is always better for driving and braking. On my car being FWD it really didn't hurt the handling any, but it felt a little more grippy cornering.

[B5.5_SEDAN]

Ttt!

[Dr.Duct]

def. can fit on a b5..

http://daseighty.net/gallery/main.php?g2_itemId=878

[B5.5_SEDAN]

That S4 is the sexiest car I have ever seen.

[B5.5_SEDAN]

Bump