Funk switch question

[enigma1406]

Where does the funk switch go?

http://oempl.us/index.php?main_page=...roducts_id=545

As can be seen here, the only free slot I have is between the passenger air bag light and the hazard switch. Will it work there?

[A4B7GA]

Yes, that is where it goes

[SGVA4]

Where does the funk switch go?

http://oempl.us/index.php?main_page=...roducts_id=545

As can be seen here, the only free slot I have is between the passenger air bag light and the hazard switch. Will it work there?

dude i want your pedals!

[enigma1406]

dude i want your pedals!

They're OEM RS4 pedals.

http://oempl.us/index.php?main_page=...roducts_id=485

[enigma1406]

Yes, that is where it goes

Cool. Thanks.

[Q-Ball]

This is going to sounds stupid, but what is the switch for? I know there will be smart ass answers......

[NyteEscape]

anything. i think most ppl replace the ESP with the FUNK.

personally, i would do something a bit more conniving...;)

[Q-Ball]

ic. Are there buttons that say different things out there?

[OEMplus.com]

This is going to sounds stupid, but what is the switch for? I know there will be smart ass answers......

FUNK means Radio in German. The switch is used mostly by police or taxi operators to enable/disable the radios (and other power-intensive equipment) in their cars.

[A4B7GA]

I am using mine for a mute switch for my V1

[jahciple]

can this be swapped with the airbag light?
is it plug and play?

[OEMplus.com]

Maybe, if your airbag light looks like this...

[dcarlson01]

is there a funk switch for the b5 a4?

[OEMplus.com]

Yes, we have one for the B5 chassis. They are a bit more, around $50.

[stef2.7t]

Is there a switch for the b5 A6?

[dcarlson01]

i need a pigtail and thats it!!!!!

[VR2V8]

Oempl.us, do you have any switches with pigtails that will fit in position #2 in the picture above? (Completely flat sides)

What about for the position all the way to the right, to the right of the ID card tray? (Rounded upper right hand corner)

These would need to have the chrome accents.

Thanks.

[OEMplus.com]

Send us an email and we'll check on the far-right switch, but I think there isn't anything there...

[stef2.7t]

So like my original question goes...is there a Funk button made for the c5 A6?

[audipotential]

FUNK means Radio in German. The switch is used mostly by police or taxi operators to enable/disable the radios (and other power-intensive equipment) in their cars.

So why would anyone want this?

[stef2.7t]

I want to trade up my ESP button for some Funk-ness

[enigma1406]

So why would anyone want this?

It's a switch integrated in to your dash. That's it. You can use it for whatever you'd like.

[Daft]

So like my original question goes...is there a Funk button made for the c5 A6?

That one should be 4B0 036 775 5PR

Listed as "Switch for two-way radio w/ inscription".

[OEMplus.com]

That one should be 4B0 036 775 5PR

Listed as "Switch for two-way radio w/ inscription".

Correct. We're checking on pricing now...

[OEMplus.com]

So like my original question goes...is there a Funk button made for the c5 A6?

Okay, got the pricing. We can order these for $35 including connectors and wires...

Switch - Funk (Radio)

[dj_dub]

when do you expect do get these in stock for the B7?

[EuroA4]

Could you use the FUNK switch and cover it with a blank button face to have a more stealth looking functional toggle?

[OEMplus.com]

when do you expect do get these in stock for the B7?

We should have more next week.

Could you use the FUNK switch and cover it with a blank button face to have a more stealth looking functional toggle?

Yes, we can get a blank one also...

[dj_dub]

We should have more next week.



Yes, we can get a blank one also...

sounds good. thanks for the reply!

[40valve]

Back from the dead.
Is this just a normal on/off switch? Looking at that photo it looks like there are only 3 wires. On, off and ground?

EDIT:
Looks like it's a momentary switch so no on/off action.
Anyone care to decipher this article? Electrical engineering is not my good side at all.

[novaME]

Any way to wire this so you can turn the 640 relay (servotronic) on/off without having to disconnect it? I like the steering without it but in traffic it pretty much feels like there is no power steering at all. Don't know if disconnecting the relay while the pump is running would mess it up or if that would make the ecu go nuts. Any suggestions?

[arorem]

so let me get this straight, you can use this switch for anything??

[novaME]

If its a momentary switch you should be able to use it for anything as long as you can figure out how to wire it up.

[jasondmaguire]

I got my funk switches and need a wiring diagram or some help on pin placement.
I found 2 different diagrams but neither seem to be correct.
I usually am pretty good with this kind of thing but you know them Germans.....

[mobbin6]

haha hooker beater

[Jer]

I too am in need of a wiring pinout for this switch.

[Jer]

Never mind, I unplugged the harness and there are numbers both on the pinouts inside the switch as well as the pigtail harness itself.

[NorcalPB]

Which one is pin 6?

[Jer]

Bottom left when looking from the front which is bottom right when looking from the rear. Don't you have one? It should have a number inside where the actual pins are.

Which one is pin 6?

[NorcalPB]

Bottom left when looking from the front which is bottom right when looking from the rear. Don't you have one? It should have a number inside where the actual pins are.

Yeah the pigtails aren't coming out with too much ease so I thought I would just ask haha. I want to use the switch without the led, all I would need is pin 6 right?