Audizine - An Automotive Enthusiast Community

Results 1 to 8 of 8
  1. 04-05-2008 03:31 PM #1
    schearer225
    schearer225 is offline
    Established Member Two Rings
    Join Date
    Jan 19 2005
    AZ Member #
    4920
    My Garage
    99.5 A4 1.8T, 07 Solstice GXP, 02 A6 3.0
    Location
    Reading ,PA

    Stoptech ST-40 Calipers Brand New $500 shipped.

    Guest-only advertisement. Register or Log In now!
    I am selling a set of stoptech ST-40 brake Calipers. They have never been used or mounted. They are black with white stoptech lettering. here are the numbers on the box:

    72.423.4H52
    ST40
    ST40/34-36-28H BLK LD RT

    and

    72.423.4H51
    ST40
    ST/34-36/28H BLK LD LT



    I must sell these ASAP so PM me your price. I am not sure what brakets are needed to make these fit yuor specific car so please contact Stoptech with those type of questions. thanks
    Last edited by schearer225; 04-07-2008 at 06:52 PM.
    AEB block/O-ringed deck~AEB crank/shot-peened/profiled~Swaintech PPM coated bearings~Raceware main studs~Eurospec rods~ARP rod bolts~JE 9.25:1 pistons/swaintech PC-9 coated skirts~Raceware Headstuds~AEB Head/extrude honed~Ferrea valves~Ferrea dual valve springs~Ferrea Titanium retainers ~Eurospec 268/260 cams~Autotech adjustable cam gear~ Borg Warner S362 .70A/R ~Custom tubular manifold~Tial 38mm wastegate~Custom FMIC~AEM Water/Meth~034 EFI stage IIc ecu~MSD DIS 2~World-Electronics PBC-1
  2. 04-05-2008 04:00 PM #2
    eurofvr
    eurofvr is offline
    Active Member Two Rings
    Join Date
    Mar 14 2008
    AZ Member #
    26446
    Location
    San Diego CA

    Re: Stoptech ST-40 Calipers Brand New

    Will these fit b5 s4 stock rotor?
  3. 04-05-2008 10:57 PM #3
    schearer225
    schearer225 is offline
    Established Member Two Rings
    Join Date
    Jan 19 2005
    AZ Member #
    4920
    My Garage
    99.5 A4 1.8T, 07 Solstice GXP, 02 A6 3.0
    Location
    Reading ,PA

    Re: Stoptech ST-40 Calipers Brand New

    I am not sure what brakets are needed to make these fit yuor specific car so please contact Stoptech with those type of questions. thanks

    Not sure, I have a B5 A4.
    AEB block/O-ringed deck~AEB crank/shot-peened/profiled~Swaintech PPM coated bearings~Raceware main studs~Eurospec rods~ARP rod bolts~JE 9.25:1 pistons/swaintech PC-9 coated skirts~Raceware Headstuds~AEB Head/extrude honed~Ferrea valves~Ferrea dual valve springs~Ferrea Titanium retainers ~Eurospec 268/260 cams~Autotech adjustable cam gear~ Borg Warner S362 .70A/R ~Custom tubular manifold~Tial 38mm wastegate~Custom FMIC~AEM Water/Meth~034 EFI stage IIc ecu~MSD DIS 2~World-Electronics PBC-1
  4. 04-07-2008 06:53 PM #4
    schearer225
    schearer225 is offline
    Established Member Two Rings
    Join Date
    Jan 19 2005
    AZ Member #
    4920
    My Garage
    99.5 A4 1.8T, 07 Solstice GXP, 02 A6 3.0
    Location
    Reading ,PA

    Re: Stoptech ST-40 Calipers Brand New $500 shipped.

    $500 shipped. still for sale
    AEB block/O-ringed deck~AEB crank/shot-peened/profiled~Swaintech PPM coated bearings~Raceware main studs~Eurospec rods~ARP rod bolts~JE 9.25:1 pistons/swaintech PC-9 coated skirts~Raceware Headstuds~AEB Head/extrude honed~Ferrea valves~Ferrea dual valve springs~Ferrea Titanium retainers ~Eurospec 268/260 cams~Autotech adjustable cam gear~ Borg Warner S362 .70A/R ~Custom tubular manifold~Tial 38mm wastegate~Custom FMIC~AEM Water/Meth~034 EFI stage IIc ecu~MSD DIS 2~World-Electronics PBC-1
  5. 04-07-2008 07:09 PM #5
    MikeyG6767
    MikeyG6767 is offline
    Senior Member Three Rings MikeyG6767's Avatar
    Join Date
    Nov 03 2005
    AZ Member #
    8634
    Location
    Eastside LBC

    Re: Stoptech ST-40 Calipers Brand New $500 shipped.

    if they fit a b7 i'll take them
  6. 04-08-2008 01:27 AM #6
    amd is the best
    amd is the best is offline
    Veteran Member Four Rings amd is the best's Avatar
    Join Date
    Oct 05 2007
    AZ Member #
    21578
    My Garage
    '91 200 20v, 01 A4 2.8 PES
    Location
    Manteca, CA

    Re: Stoptech ST-40 Calipers Brand New $500 shipped.

    PM Sent
    2012 Golf TDI
    2001 A4 2.8 Avant
    1991 200 20v
    YouTube
    8V Audi S3/RS3 Facebook Group
  7. 04-08-2008 02:28 PM #7
    Dwaller
    Dwaller is offline
    Veteran Member Two Rings Dwaller's Avatar
    Join Date
    Nov 17 2004
    AZ Member #
    4191
    My Garage
    Dahlbach stg3+ tip A4
    Location
    L.I. NY

    Re: Stoptech ST-40 Calipers Brand New $500 shipped.

    PM sent!
    Dahlbach racing stg3+ DBR intake mani,DBR ko4-19,DBR tip chip,RS4 motor mounts,ER sport front mount,Stasis SS coilover's,H&R sway's,DBR cat back exhaust,Miltek HFC,custom AFE air intake, iForged rev's 18x8.5,Stoptech BBK front ST rotor's rear,Cam's and a bunch of other sh_t!!!
  8. 04-08-2008 02:29 PM #8
    schearer225
    schearer225 is offline
    Established Member Two Rings
    Join Date
    Jan 19 2005
    AZ Member #
    4920
    My Garage
    99.5 A4 1.8T, 07 Solstice GXP, 02 A6 3.0
    Location
    Reading ,PA

    Re: Stoptech ST-40 Calipers Brand New $500 shipped.

    Sold!!!!!!!!!
    AEB block/O-ringed deck~AEB crank/shot-peened/profiled~Swaintech PPM coated bearings~Raceware main studs~Eurospec rods~ARP rod bolts~JE 9.25:1 pistons/swaintech PC-9 coated skirts~Raceware Headstuds~AEB Head/extrude honed~Ferrea valves~Ferrea dual valve springs~Ferrea Titanium retainers ~Eurospec 268/260 cams~Autotech adjustable cam gear~ Borg Warner S362 .70A/R ~Custom tubular manifold~Tial 38mm wastegate~Custom FMIC~AEM Water/Meth~034 EFI stage IIc ecu~MSD DIS 2~World-Electronics PBC-1
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules



    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.