Problem trying to replace rotors

[evehill]

When I was threading the caliper screw back in the screw stripped the threads inside the caliper, and now won't go in... I don't know what I can do with it now

This is the screw I'm talking about:

[The_Jerbel]

Chase the threads with a die set.

[evehill]

Chase the threads with a die set.

The screw is fine, its where it threads in that is stripped. I don't think I'll be able to tap it

[infinkc]

just curious why did you remove the bleader screw all the way? you might be sol and have to get a new caliper unless you can fins another blead screw that is larger and tap the caliper threads.