FS : 034 Motorsport High Flow tubular Manifold + Downpipe

[Wizard-of-OD]

Hi Guys,
this is from my personal project but I am going a different route so I need to find an additional wastegate

I will offer a 1 year repair warranty on the manifold and additional "help" with supply of parts to whoever wants this for there project.It will not work on ME5 users looking to retain the MAF as this plants the turbocharger right behind the cylinder head.

Manifold is flanged for a T3 turbocharger and a Tial 44mm wastegate.Downpipe has 1 02 bung on it as I only needed one.This will work on a 4 bolt turbine housing with a V-band adapter.

Retail on this is:
900 + 248 + 10(extra 02 bung) + 35 for Tial 44 flange = 1193US

I will take 1050US + shipping




PM me

[Wizard-of-OD]

All PM's replied to.

[Wizard-of-OD]

ttt

[apexslider]

pm sent

[Wizard-of-OD]

[Wizard-of-OD]

tttttt

[Silence]

Do you have a downpipe which works for the b6? I recall a member returning the kit for his b6 for something not mounting correctly.

[Wizard-of-OD]

Do you have a downpipe which works for the b6? I recall a member returning the kit for his b6 for something not mounting correctly.

The downpipe works on both B5 and B6.The member you are speaking of returned his manifold because it was the 1st generation.It planed the turbocharger WAY too far out to the point where getting an adapter for the compressor inlet was extremely difficult.
Like I said,this is for the user who wants to run a MAFLESS set up.

[Silence]

Is the manifold you're selling the first or second gen?

[Wizard-of-OD]

Second generation.