Originally Posted by
VR2V8
What locations did you use to hardwire the V1?
Did the ADR need power too, or just the CAN signals? How much of a pita was it to get the nav out, stuff the adr in there, and get the nav back in?
This is something I've wanted for a while....
i tapped 75X, you can also tap a fuse off the box
you use the V1 direct hardware (which is essentially a 1 to 3 RJ11 splitter). you give the hardwire adapter power, plug your V1 in to the main port and the ADR in accessory port (where you would normally plug in a remote display)
the CAN signals are two wires off the back of the headunit, really simple. stuffing the ADR back there was not a problem, I have my DICE and ADR back there and may soon have my Dietz MMI
Bookmarks