Will OEM TT S-Line wheels fit on B7 S4???

**channad** · 04-01-2008 11:05 AM

Are they the same bolt pattern? Anybody know the offset? I posted up in wheel/tire forum, but that guy from VMR is trying to get me to buy his. I can't get a simple answer to these questions.

The wheels are 19x9, here's a pic.

**jamesmi13** · 04-01-2008 11:29 AM

they should if they are 5 x 112 and have something close to a 35 off set

**Silververtu** · 04-01-2008 12:55 PM

call the dealer and ask for the TT wheels spec.

**91gl** · 04-01-2008 01:36 PM

i think their offset it closer to 50

**EuroB6** · 04-01-2008 01:56 PM

the MK2 TT has a bolt pattern of 5x112 now, the MK1 TT had 5x100, same as the GTIs. anyways, im pretty sure you'll be ok, it's wide, with 9" width, but the offset, is high enough to clear ur brakes adn not poke out from the fenders. Will probably look good too.

**wwb4** · 04-01-2008 02:58 PM

Originally Posted by Silververtu

call the dealer and ask for the TT wheels spec.

This would be my recommendation/suggestion as well.

**channad** · 04-01-2008 03:40 PM

Was going to call the dealer, but they usually need a VIN. Thankfully, that was not the case. So here are the stats for the wheels:

19x9
bolt - 5x112
ET 52
$627 ea.

with a 15 mm spacer, offset is down to 37. Would that be enough for the 9 inch width? I think stock tire is 255/35R19. I wonder if that will rub. hmmmm...I'll post that in wheel and tire as well.

**EuroB6** · 04-01-2008 05:12 PM

you'll rub

**S-Fore** · 04-01-2008 05:52 PM

@ $627 per wheel, you could get a serious wheel, lighter one too that will offer more than looks. IMO.

**channad** · 04-01-2008 08:18 PM

well, the mesh wheels I want in the 18" size cost around $1200 each, but they are custom.

when I look at all the wheels on the internet I get big dreams of what my car will look like. Then I look at my car and it's like. Those wheels are perfect. So I was thinking I could get the same wheels, only bigger. I don't think it's going to happen.

I do love those MTM Bimotos, but they are heavier than sin! Although they will cost less than the custom wheels I want.