FS: 94 Corvette "Saw Blade" 17x8.5/17.9.5" Wheel Set!!!!

[MidwestA4]

Simply sold the car they were supposed to go on :thumbup:


Bought these wheels a few months ago and started the polishing process on them.

- They're roughed in with 80grit/150grit
- COMPLETELY ready to be finished up!!!
- All sandable blemishes and clear were removed

On to the details:

- 17x8.5" fronts
- 17x9.5" rears
- 5x4.75 lug pattern
- NO BENDS
- 56mm Offset on ALL
- NO CURB RASH (only one or two small knicks on 2 wheels)
- NO CRACKS
- NO BARREL DENTS
- Made in Japan
- Very light-weight


Simply finish sanding/polishing these and they'll be perfect :thumbup:

$400 SHIPPED


this one still has a little clear coat left on it which I'll take care of today.

[///M3 TO S4]

i'm pretty sure those are 5x120.....which wont fit on any audi

[Lazer Viking]

^ adapters ?

bump this for you

[MidwestA4]

i'm pretty sure those are 5x120.....which wont fit on any audi

don't be a moron.. you'll obviously need 1.3" front adapters and 1.5" rear adapters just like any vdub in order to fit. and while close the 5x120 they're off enough to not be safely run with that pattern adaptor due to the hub.

So.. your post was pretty much worthless, huh?

[MidwestA4]

up

[blakwag]

don't be a moron.. you'll obviously need 1.3" front adapters and 1.5" rear adapters just like any vdub in order to fit. and while close the 5x120 they're off enough to not be safely run with that pattern adaptor due to the hub.

So.. your post was pretty much worthless, huh?

wow, pwned. haha. any idea on their weights?

[MidwestA4]

less than 22lbs each.. it surprised the hell out of me when i picked up the 9.5's.

[MidwestA4]

new price.. these MUST go

[MidwestA4]

top

[MidwestA4]

top

[MidwestA4]

up up

[MidwestA4]

up

[MidwestA4]

pics up

[MidwestA4]

$350 if bought today or tomorrow.

[kolan67]

don't be a moron.. you'll obviously need 1.3" front adapters and 1.5" rear adapters just like any vdub in order to fit. and while close the 5x120 they're off enough to not be safely run with that pattern adaptor due to the hub.

So.. your post was pretty much worthless, huh?

no ones gona buy sh_ _ from some one who responds like that.. good job dick

[MidwestA4]

if someone doesn't buy these because of an honest statement such as that it won't hurt my feelings/pockets. thanks for the bump

[MidwestA4]

PM's replied.

[MidwestA4]

bump

[MidwestA4]

final price.. these gotta go

[j2da]

no ones gona buy sh_ _ from some one who responds like that.. good job dick

bump

[MidwestA4]

lmao