Daytona Gray RS4 on 210 West at 10:30 this morning

[RAudi Driver]

Are you on here. I saw you blasting over the hill, through Eagle Rock and tried to catch you. I wasn't in my audi.

[jerrym]

stock??

[RAudi Driver]

looked stock. Could have has a set of spacers on it but it blasted by me. Loked a tiny bit low, but maybe not.

[jerrym]

hey ed. i just watched a video of syko's rs4 on milltek with unresonated pipes.. and im drooling right now :)

[jerrym]

i think im going to just keep my resonated pipes and buy unresonated ones incase i get a ticket so ill just put the resonated ones back on

[RAudi Driver]

Nice! What mods are done to you car?

[jerrym]

Nice! What mods are done to you car?

milltek exhaust. 10mm spacers.. and kw v3's very soon. with HRE a40 monoblocks on the way.

[channad]

milltek exhaust. 10mm spacers.. and kw v3's very soon. with HRE a40 monoblocks on the way.

A40s???? Are those the same as the P40s??? That's what I wanted on my car oh well, my car would have been stolen where I live with those wheels.

[jerrym]

A40s???? Are those the same as the P40s??? That's what I wanted on my car oh well, my car would have been stolen where I live with those wheels.

P40 stands for Porsche 40 design monolock
.. so A40 = Audi 40 ...
and yes.. :) same wheel.

[RAudi Driver]

Look at the brain on Jerry. I can't believe you're gonna get the A40's for your car. That is the exact wheel that I wanted and now there is going to be two RS4's in the Pasadena area with these wheels.

Jerry, I need to hook up with you and listen to your car. it seems as though you are going down the exact path that I want to take with my car.

How much Milltek do you have? Cat back? Dp's? Valved?

Who's spacers are you running? H&R's? MTM's?

What is the ETa for the HRE's?

Your car is going to be insane!

[jerrym]

i have the cat-back resonated milltek muffler non-valved..
with h&r 10mm front and rear spacers..
and the eta for the hre's are 7-8 more weeks :)
im going to run 275 or 285 toyo t1r's all around on the HRE A40's.
and hopefully if everything goes well. im going to get the non-resonated milltek pipes and euro steering wheel + air bag and. carbon fiber front grille + front spoiler piece located on the bottom of the bumper.. the mirror is difficult to wrap because of the extension from the door. so it will look funky if i wrap it.

[jerrym]

i was debating between the hre's or 20" champion edition bbs lm. but they dont make it anymore.. :(

[channad]

HRE!!!!!! I saw them at the car show on a S5 and I stopped in my tracks! They are sexy! I only wish I could put them on my car.

[evilb]

i was debating between the hre's or 20" champion edition bbs lm. but they dont make it anymore.. :(

HRE A40's FTMFW. Did you get silver, brushed, black? I hope 20". Also curious if you got a custom rear offset to give them a concave look, lke the P-cars.

Also, where are you getting your KW V3's? I'm sort-of shopping for them right now, but my audio system is going to put them on the backburner for a few months.

b

[RAudi Driver]

i have the cat-back resonated milltek muffler non-valved..
with h&r 10mm front and rear spacers..
and the eta for the hre's are 7-8 more weeks :)
im going to run 275 or 285 toyo t1r's all around on the HRE A40's.
and hopefully if everything goes well. im going to get the non-resonated milltek pipes and euro steering wheel + air bag and. carbon fiber front grille + front spoiler piece located on the bottom of the bumper.. the mirror is difficult to wrap because of the extension from the door. so it will look funky if i wrap it.

Nice. sounds like you have a very well put together car. I have a Euro RS4 wheel sitting on my desk. Still trying to decide if I am going to use it.

[evilb]

Nice. sounds like you have a very well put together car. I have a Euro RS4 wheel sitting on my desk. Still trying to decide if I am going to use it.

No, you're not, because they're lame and too many people have them... so go ahead and sell it to me alright?

b

[jerrym]

HRE A40's FTMFW. Did you get silver, brushed, black? I hope 20". Also curious if you got a custom rear offset to give them a concave look, lke the P-cars.

Also, where are you getting your KW V3's? I'm sort-of shopping for them right now, but my audio system is going to put them on the backburner for a few months.

b

19" not 20.

[RAudi Driver]

jerry, is it 19 x 9? What's the offset and what tire size are you going to run?