Audizine - An Automotive Enthusiast Community

Results 1 to 15 of 15
  1. #1
    Veteran Member Three Rings quicksilver_S's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    67
    Location
    City that never sleeps

    F/S Greddy turbo timer

    Guest-only advertisement. Register or Log In now!
    Old style greddy turbo timer. Bought it used but never installed it. Its in great condition. This turbo timer will fit in the B5 cup holder with some customization and display is red to match audi interior color. Selling for $50.00 + shipping or Best offer.

    PM with me question. Thanks for looking.





  2. #2
    Registered Member Two Rings
    Join Date
    May 03 2004
    AZ Member #
    1999
    Location
    Flo Mo

    Pm'd ya

  3. #3
    Registered Member Four Rings audlman's Avatar
    Join Date
    Apr 19 2004
    AZ Member #
    1785
    My Garage
    04 SRT-4
    Location
    louisville, ky

    what do you mean it will fit in the cupholder with some customization?

  4. #4
    Veteran Member Three Rings quicksilver_S's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    67
    Location
    City that never sleeps

    Replied to all PMs


    Originally posted by audlman
    what do you mean it will fit in the cupholder with some customization?
    What I mean to say is that it doesnt just plugs right in there or it might if its tight enough. I have not done the installation on the cup holder but I would assume that you need minor modification on the inside part of the cupholder(drill a hold for the screw) to make the turbo timer stay there and not fall off during accelaration.

  5. #5
    Established Member Two Rings wakko's Avatar
    Join Date
    Apr 08 2004
    AZ Member #
    1654
    Location
    Temple City, CA

    actually, all you need is wrap it around on 1-2 layers of friction tapes and it will stays in there tight.
    2000 A4 1.8T FWD TIP / 20%F 15%R tints/GIAC 1.0/ GIAC TIP / Full 2.5" DP back custom exhaust / Flik WASP-A 18" / RS4 grill / Ecodes / OEM RS6 4300k HID / Reiger V1 sides / Painted Front lower / Molded SGI rear / Apex Cupkit Suspension / Greddy TT / AutoMeter Boost Gauge / Audi all-weather mats / Forge 007 DV

  6. #6
    Veteran Member Three Rings quicksilver_S's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    67
    Location
    City that never sleeps

    sale pending... I let you guys know if it falls through. Thanks all.

  7. #7
    Registered Member Four Rings Zodiak's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    69
    Location
    Washington DC

    Originally posted by quicksilver_S
    I have not done the installation on the cup holder but I would assume that you need minor modification on the inside part of the cupholder(drill a hold for the screw) to make the turbo timer stay there and not fall off during accelaration.
    Like stated already, there is no need for a screw or any drilling. the TT is actually almost the exact same size (maybe .5mm smaller) of the OEM cupholder on 99.5+ B5s. Go around the sides 2 or 3 times with electrical tape holds it in nice and snug.

  8. #8
    Veteran Member Three Rings quicksilver_S's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    67
    Location
    City that never sleeps

    Thanks for all the interest. The timer is SOLD

  9. #9
    Registered Member Three Rings []D[][]V[][]D's Avatar
    Join Date
    Jul 22 2004
    AZ Member #
    2874
    My Garage
    2004 A8L 4.2, 2004 A4 1.8t Cabrio, 2000 A4 1.8TQ
    Location
    Los Angeles, Ca

    nooo!

  10. #10
    Registered Member Three Rings []D[][]V[][]D's Avatar
    Join Date
    Jul 22 2004
    AZ Member #
    2874
    My Garage
    2004 A8L 4.2, 2004 A4 1.8t Cabrio, 2000 A4 1.8TQ
    Location
    Los Angeles, Ca

    good buy, good buy

  11. #11
    i'll have another one available ina few days for local install. email me. PM full.
    Norcal/SoCal Audi Electronics/Audio/Alarm Installer. Email me Any questions. Red LED mod: Turbo Timers
    http://www.audimods.com/agravic_sig.jpg

  12. #12
    Veteran Member Three Rings cjk's Avatar
    Join Date
    Jul 15 2004
    AZ Member #
    2804
    My Garage
    2001 WB S4 Avant
    Location
    Seattle, Wa

    Anyone know where to get a Greddy TT-like the one pictured here? I have been looking for awhile now and need one soon...please help!

    Thanks,
    Clint

  13. #13
    Veteran Member Four Rings TurbousMaximus's Avatar
    Join Date
    Aug 25 2004
    AZ Member #
    3274
    Location
    Whitehall, PA

    2013 S7 Phantom Black on Black diamond - loaded
    2009 Audi R8, Black on Black w/ Blown V8 and black ADV.1 7.1's. (Carbon, Alcantara, Etc.) - Sold
    2011 S5 Sprint Blue w/ Silver Alcantara, B&O, Carbon Atlas, Nav, and Rear Differential - Traded.
    2006 A4 S-Line Brilliant Red 6spd - Sold
    2000 1.8tqms Ko4'd Brilliant Black - Sold

  14. #14
    Veteran Member Three Rings cjk's Avatar
    Join Date
    Jul 15 2004
    AZ Member #
    2804
    My Garage
    2001 WB S4 Avant
    Location
    Seattle, Wa

    THanks....will check it out
    REALTOR specializing in residential real estate throughout the greater PNW!
    https://kinzeleidsonteam.com//
    Constantly on my WB S4 Avant i

  15. #15
    Veteran Member Three Rings A4SUM's Avatar
    Join Date
    Mar 03 2004
    AZ Member #
    1070
    Location
    Los Angeles

    check out www.wholehyper.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.