Project Frontrash GT3071R :)

[Don Supreme]

^ Yeah I have hard that argument too.....

Unfortunately, thats not an option for me. My turbo blows more air than my engine can ingest past 24 psi............... You should see my boost guage when I run 30 psi!!!

[Don Supreme]

There are 3 intake valves and 2 exhaust valves hardly any material to work with even if you wanted to port the intake side.

Oh yeah?



Keep in mind stock small port flows about 167CFM and stock AEB 200cfm on intake.

[Greg@DTH]

I respect what you have done...there are always many paths to the final destination. I will never run H20/Meth....

Race gas and soon to be Nitrous for me...

I always know when I want to go fast...I have no issue planning for it. It is very easy for me to either let my tank go empty by a Friday night ( to pump 5 gallons of MS109 in it from my handy dandy 54 gallon barrel in the garage) and then I drive down to Sunrise ave in CH if I want some fun.

Tracee knows what's up when we go to dinner...she can smell the fuel, feel the power as knows we are going to have a little stoplight to stoplight fun.

[GTMRS4]

Does anyone know if the GT3071R fits the APR Manifold?

[Greg@DTH]

The 30-71WG will if you get the T-2 flange on it. APR can tune for it as well. They will not do it unless you have a built bottom end though.

EuroCode did one for a customer that has a built 2.0L, puts down 350AWHP on pump gas, 8,000 RPM redline

[GTMRS4]

greg - can you get me more specific details and costs for this? Dave never called and if you got me an invoice that would be terrific.

[A4ringedONE8T]

Shawn he should have a core and I am sure he will build one. I will call him right now and get the details for you.

Let me know up front...do you want to provide the parts and have them do the assembly or to you want David to source everything?

There is about 5 hours of labor installing the valves and what not ($400), it is not fun to do, Chris can vouch for that.

If David will supply the parts and give them to me from wholesale, I will let him do and get everything. If not I can buy the parts myself, save some money, and send them to him. Remind him that as soon as I get get the new head, I will swap them and send him mine back complete. Thanks!!

[A4ringedONE8T]

greg - can you get me more specific details and costs for this? Dave never called and if you got me an invoice that would be terrific.

I just went over all of this with Lee (RXREP) a few days ago as well. Its very well possible and if you get the 3" inlet and 5 bolt flange, it will bolt up to everything else APR!

[Don Supreme]

You should try the pag parts special! It will bolt up and makes good power.

[A4ringedONE8T]

You should try the pag parts special! It will bolt up and makes good power.

???

[HeymyAudi]

Damn I respect this thread ! Great Info this is what Audizine needs to be about!

[Don Supreme]

???

I would have suggested that to you too, but you wanted to use ATP parts.

Arnold @ Pag Parts has some serious toys for the 1.8t. He has a turbo in 3071and 3076 flavor that bolts up the APR mani, but uses a HKS .73 housing... Good stuff.

[A4ringedONE8T]

I would have suggested that to you too, but you wanted to use ATP parts.

Arnold @ Pag Parts has some serious toys for the 1.8t. He has a turbo in 3071and 3076 flavor that bolts up the APR mani, but uses a tial .73 housing... Good stuff.

What the hell is the pag parts special??? I have no clue what your talking about ...

[Don Supreme]

I am talking about this....

[A4ringedONE8T]

Thats pretty sweet but helps to have the APR kit already it looks like

[AudiA4_20T]

Shawn, Sean is talking about the turbos that Arnold at PagParts sells. He uses a custom HKS exhaust housing with a .73 A/R.

That motor that Shawn posted is out of a jetta running a T25 3076R and ran a 10.9 on slicks

I am considering that turbo in T3 form a lot... Apparently the turbo spooled 300 rpms later than his 2871R which can tell you how fun it would be on the street

O and also, having the APR kit limited him... PagParts has a great manifold that is perfectly capable of running that turbo

[A4ringedONE8T]

A .73 a/r would spool slower than the .63 I got so why would I want that?

Does Pagparts make a downpipe and everything that bolts up?

[AudiA4_20T]

A .73 a/r would spool slower than the .63 I got so why would I want that?

Does Pagparts make a downpipe and everything that bolts up?

Shawn talk to Arnold@Pagparts you wont be dissapointed trust me. He has been around turbos for a long ass time and he will set you up with a serious setup if you want it. I have talked to him a few times about my 400awhp on pump gas goal and he was pretty damn confident he could do it with a custom 30R. He has countless big hp setups out there

[A4ringedONE8T]

Shawn talk to Arnold@Pagparts you wont be dissapointed trust me. He has been around turbos for a long ass time and he will set you up with a serious setup if you want it. I have talked to him a few times about my 400awhp on pump gas goal and he was pretty damn confident he could do it with a custom 30R. He has countless big hp setups out there

Dont need it now but Ill keep it in mind for the future, my HP goals wont be an issue with FWD and the setup I have coming

[dougyfresh]

Those pictures are from a transverse 1.8T. Does Arnold have a longitudinal downpipe fabbed up?

[Don Supreme]

A .73 a/r would spool slower than the .63 I got so why would I want that?

Does Pagparts make a downpipe and everything that bolts up?

Apples to Oranges...

You are comparing .63 t3 to a .73 t25. Its not a direct relation. Regardless, we are talking about the ability to spool quick and run 10s if you decide to go BALLS OUT......

As Clint said Arnold sells manifolds, but he came up with this setup for people with apr stage 3 needing an upgrade path.

You are too deep with ATP now to turn back, so just make it happen. I am sure you can.

Are you going to dyno on the stock motor?

[A4ringedONE8T]

Apples to Oranges...

You are comparing .63 t3 to a .73 t25. Its not a direct relation. Regardless, we are talking about the ability to spool quick and run 10s if you decide to go BALLS OUT......

As Clint said Arnold sells manifolds, but he came up with this setup for people with apr stage 3 needing an upgrade path.

You are too deep with ATP now to turn back, so just make it happen. I am sure you can.

Are you going to dyno on the stock motor?

Im not changing anything until I make my own manifold, I was never thinking of "turning back"

Yes I will dyno with the 550's and 3" MAF before I put rods in

[Greg@DTH]

greg - can you get me more specific details and costs for this? Dave never called and if you got me an invoice that would be terrific.

You need to call me and provide your contact information. I will get David on a confrence call with you.

916-705-0897

[9744RR]

Almost 10 pages.

[9744RR]

Keep the info coming.

[AudiHere04]

keep us FWD guys updated...

[mtbrider]

man i'm gone for 3 days and i'm so far behind, i'm gonna have to get my head built now

[A4ringedONE8T]

man i'm gone for 3 days and i'm so far behind, i'm gonna have to get my head built now

So far behind? Im not doing the head yet, my budget doesnt allow for that much quite yet

[A4ringedONE8T]

keep us FWD guys updated...

FWD FTW

[A4 TSCHUSS]

is it done yet

[A4ringedONE8T]

I dont even have the stuff yet and way to read, Ive said many times when everything will be here and when Im putting it in ...

[SinisterA4]

Shawn, you must be excited because today is the day that all of your stuff SHOULD be coming in the mail.

[A4ringedONE8T]

"Out for Delivery"

Im leaving work #1 a bit early to go pick it up from the shop, HOPEFULLY I have everything, if not overnight it by the weekend, and install on Sunday

[TonyD]

Im expecting vids and pics on Monday.

[A4ringedONE8T]

Im expecting vids and pics on Monday.

Of course

[AudiHere04]

"out for delivery" is the worst...the anticipation is a killer....its like doing the pee pee dance...when is it getting here!!!

[A4ringedONE8T]

Its at my shop but Im still at work #1 til 4:30. It will be in my hands by 6 o'clock. Teaser pics later I promise

[A4ringedONE8T]

Anyone need new wheels??

Clicky Clicky

(I know I know Im crazy )

[mtbrider]

I hear your anticipation, my stuff is also out for delivery right now as well.

[A4ringedONE8T]

I hear your anticipation, my stuff is also out for delivery right now as well.

Cant wait to see your setup as well!! When are you installing?