FS: custom DUH FMIC for 2000-2002 S4 (BWW)

**Todeshandler** · 08-01-2004 10:54 AM

Well here is what the kit would cost if you bought it from DUH Engineering:

This is what is included and the retail price of each
-Modded Front Bumper ($500 for cutting + cost of bumper like $350)
-DUH FMIC w/ Pipes & PS Cooler ($2200 retail)
-Custom Forge DVs ($300 retail)
-16" SPAL Fan ($200 retail)
-DUH/MoCal Oil Cooler ($500 retail)
-Full Wiggins Clamps ($800 retail)

Total = $4850

at this point I am really not sure what to ask for it. So I am accepting serious offers. NO LOW BALL OFFERS!!!! Remember that there is no wait, it is practically brand new (only 1200 miles) on it, and it is complete with the front bumper so the install will be bolt on other than the fan. It seems to be a very high demand product as if you want one you have to wait for 3-8 months if not longer to get one from DUH.

The intercooler is capable of high hp applications. The last time I took my car to the dyno. I put down 435whp and 440wtq. Of the 4 S4s on the dyno my 3 runs were consistent and repeatable due to the FMIC and the other S4s were getting heat soaked and loosing power from run to run.

Dyno Sheet

Oil Cooler & Power Steering Cooler

Wiggins Clamps

**10SecS4** · 08-01-2004 11:22 AM

Holy shit, you essentially spent $4800 on a FMIC and oil cooler?

**Todeshandler** · 08-01-2004 11:28 AM

I listed the parts and their retail price. As you can see there is $2150 in other parts and bumper stuff. It is esssentialy $2700 for the FMIC and Oil Cooler....

**10SecS4** · 08-01-2004 01:41 PM

Instead of listing the "retail price", why don't you post what you paid? That will give others a better idea of what to offer you.

**Todeshandler** · 08-01-2004 01:53 PM

Did I ever say I didn't pay retail??? No because I did pay retail. Thanks for your suggestion though. As far as what people should offer me..... basically you cannot get a DUH FMIC anymore, well at least not for now, as Eric (DUH) is out of cores and doesn't have any coming right now. There is one other DUH FMIC that has been sold used and it sold for higher than "retail" because it was available immediatly. I am not looking to get more than I paid but I am not willing to let it go for 1/2 of what I paid either. I am sure we can find a happy medium.

**jrodmk2** · 08-01-2004 02:21 PM

which forges are they the race ones?

**Todeshandler** · 08-01-2004 02:25 PM

They are custom but similar to the FMDVRs (race valves). They also have custom billet adapters to mount up to the IC tubing and wiggins clamps.

**jrodmk2** · 08-01-2004 02:35 PM

ahhhhh. i noticed that. very clean setup.

**imtmola** · 08-01-2004 06:13 PM

so are you willing to just sell the fmic?

**Todeshandler** · 08-01-2004 06:34 PM

Sure I would sell just the FMIC. But you need to realize if you buy the FMIC you have to get the Wiggins clamps and Forge DVs because the FMIC is custom made for those. Regular hoses and DVs will not fit.

**imtmola** · 08-01-2004 08:10 PM

ahhh, that is way too much money to spend for that piece

**Todeshandler** · 08-01-2004 08:12 PM

True it is expensive..... but it is one of the best intercooler setups money can buy

**mikeofgte** · 08-02-2004 04:01 PM

pm'd

**Paul_858** · 08-02-2004 06:07 PM

Good sh*t, quality product :) I've seen a few first hand and have his A4 fmic. This is a quality piece with very exact fitment. Performance is dyno proven, good stuff! sorry to see it go.